Conversion from 50 Gallons to Decaliters

Information about the Gallon (gal)

The gallon in the imperial system is a unit of volume equal to exactly 4.54609 litres. Its symbol is gal. It contains four quarts, eight pints and 160 imperial fluid ounces, and it is about a fifth larger than the United States gallon, a difference that causes more confusion than any other single discrepancy between the two systems.

Its original definition was elegant. The Weights and Measures Act of 1824 fixed the imperial gallon as the volume occupied by ten pounds of distilled water at sixty-two degrees Fahrenheit under a barometric pressure of thirty inches of mercury. That tied liquid measure directly to the avoirdupois pound, so a gallon of water weighed ten pounds and a pint weighed a pound and a quarter. In 1985 the definition was replaced by the exact metric figure, but the old relationship still holds to within a fraction of a per cent.

Fuel economy keeps it in daily use. British and Irish drivers describe consumption in miles per gallon even though fuel has been sold in litres since the 1990s, and the figure is an imperial one. The same car scores about twenty per cent higher in British miles per gallon than in American, purely because the gallon is larger, which is why cross-Atlantic comparisons of efficiency are meaningless unless the gallon is specified.

Legal use in Britain is now narrow but real. Draught beer and cider must be sold in pints, half pints or third pints, and milk in returnable containers may be sold in pints, which keeps the whole imperial chain alive by keeping its smallest working member alive. Several Caribbean territories still sell motor fuel by the imperial gallon.

The difference from the American gallon is worth stating plainly. One imperial gallon is 4.546 litres and one United States gallon is 3.785, so an imperial gallon is 1.2 United States gallons. Recipes, fuel figures, tank capacities and chemical dilutions all break if the wrong one is assumed, and the error is large enough to matter but small enough to look plausible.

Below it the chain runs quart, pint, gill and fluid ounce, each a quarter or a fifth of the one above rather than a decimal step. That structure was designed for dividing a container by halving it repeatedly, which is a practical merit when pouring and a serious nuisance when calculating.

One imperial gallon equals 4.54609 litres, 8 imperial pints, 160 imperial fluid ounces, or about 1.201 US gallons.

Information about the Decaliter (daL)

The decalitre is a unit of volume equal to ten litres. Its symbol is daL, and the spelling dekalitre is also accepted. It sits between the litre of the household and the hectolitre of the trade, and although it once had a settled place in European markets it is now among the least written of the metric volume units.

Its historical role was as a physical measure rather than a number. Nineteenth-century French markets sold grain, potatoes, chestnuts and dried beans out of stamped cylindrical vessels holding one decalitre, half a decalitre or a double one, and a trader's set of these was inspected and verified like a set of weights. Selling dry goods by volume was faster than weighing them and needed no balance, so the vessels did real work.

Weighing displaced it. Once cheap accurate scales became universal, dry goods moved to mass, which is fairer to the buyer because it does not depend on how densely a load happens to settle. The decalitre lost its purpose along with the practice, and the vessels survive in museums and in the vocabulary of a few older markets rather than in commerce.

The quantity itself remains perfectly ordinary. Ten litres is a large household bucket, half a jerrycan, the fuel tank of a scooter, or a fortnight of drinking water for one person. It is roughly the volume of a cubic vessel twenty-two centimetres on a side, and it weighs ten kilograms when filled with water.

What killed the unit as a written form was the same pressure that removed deca everywhere else. Metric practice steps by factors of a thousand, so litres serve until about a thousand of them and hectolitres take over for trade quantities. Ten litres is written 10 L, which is shorter than 1 daL, needs no explanation, and sorts correctly beside 5 L and 200 L in the same table.

When the unit does appear, usually in an old record or a translated document, the conversion is a single step. Multiply by ten for litres, divide by ten for hectolitres, and the resulting figure will match modern usage without any loss of precision.

One decalitre equals 10 litres, 0.1 hectolitres, about 2.64 US gallons, or about 2.2 imperial gallons.