Conversion from 4 Yottabits per second to Petabits per second

=

Invert

Formula to convert Yottabits per second (Ybit/s) to Petabits per second (Pbit/s)

More information

Yottabits per second to Petabits per second conversion table

Yottabits per second (Ybit/s)Petabits per second (Pbit/s)
1 Yottabit per second1000000000 Pbit/s
2 Yottabits per second2000000000 Pbit/s
3 Yottabits per second3000000000 Pbit/s
4 Yottabits per second4000000000 Pbit/s
5 Yottabits per second5000000000 Pbit/s
10 Yottabits per second10000000000 Pbit/s
20 Yottabits per second20000000000 Pbit/s
25 Yottabits per second25000000000 Pbit/s
50 Yottabits per second50000000000 Pbit/s
100 Yottabits per second100000000000 Pbit/s

Data-transfer rate reference points

ReferenceYottabits per second (Ybit/s)Petabits per second (Pbit/s)
A dial-up modem5.6 × 10-20 Ybit/s5.6 × 10-11 Pbit/s
Typical home broadband1 × 10-16 Ybit/s0.0000001 Pbit/s
Gigabit Ethernet1 × 10-15 Ybit/s0.000001 Pbit/s
Streaming a 4K film2.5 × 10-17 Ybit/s0.000000025 Pbit/s

Try our other unit converters

LengthMassTemperatureEnergyVolumeSpeedTimeDataPressureFrequencyData-transfer rateVolumetric flow rateAngleArea

Information about the Yottabit per second (Ybit/s)

The yottabit per second is a unit of data transfer rate equal to a thousand zettabits per second. Its symbol is Ybit/s. For thirty years it was the largest rate the metric system could name, and it describes a speed that has no application anywhere: not in engineering, not in research, and not in any forecast that anyone takes seriously.

Its distance from reality is easy to state. Global internet traffic averages roughly one exabit per second, so a yottabit per second is about a million times the combined communication of the entire human species. The largest single link ever built runs at a few hundred terabits per second, which is a ten-billionth of this figure.

The unit is nonetheless properly defined, and that completeness is the point. The metric system's rule is that every prefix combines with every unit without exception, so a reader who has never seen Ybit/s can decode it from the prefix alone. A system with gaps would need a table of which combinations are legal, and a table is exactly what a rule-based system exists to avoid.

There is a physical way to think about the number. A yottabit per second is 125 zettaoctets per second, and the total quantity of data humanity has ever stored is a few hundred zettaoctets. A link at this rate would therefore transmit the entire accumulated information of the species in a couple of seconds. No such body of data exists in one place to be sent, and nothing at the far end could receive it.

The prefix yotta was adopted in 1991 alongside zetta, at a conference that also had to consider which letters remained free. It stood at the top of the metric ladder until 2022, when ronna and quetta were added above it, partly because data quantities were beginning to approach the old ceiling. Rates have not followed quantities upward at the same pace.

For a converter, handling the unit is a matter of consistency rather than utility. A tool that converts every metric prefix correctly does not need to decide which of them anyone will use, and a figure written in yottabits per second — however unlikely — converts by the same rule as any other.

One yottabit per second equals 1,000 zettabits per second, 125 zettaoctets per second, or about 0.8272 yobibits per second.


Information about the Petabit per second (Pbit/s)

The petabit per second is a unit of data transfer rate equal to a thousand terabits per second. Its symbol is Pbit/s. It marks the frontier of optical transmission research: the rate at which laboratories have carried data down a single strand of glass, and which no deployed system yet approaches.

The records were set by combining three techniques. Multi-core fibre puts several separate light-guiding paths inside one cladding, so that a single strand behaves like a bundle. Wavelength division multiplexing runs hundreds of distinct colours down each of those cores. Advanced modulation encodes many bits into each pulse. Multiplying the three together is what reaches a petabit per second.

Such demonstrations run over tens of kilometres of fibre in controlled conditions, not the thousands of kilometres a working sea cable must span. Distance is the hard part: signals attenuate, dispersion smears pulses together, and non-linear effects in the glass grow with power. Every kilometre added makes the same rate harder to sustain, which is why deployed cables sit two orders of magnitude below the laboratory record.

In octets a petabit per second is 125 teraoctets per second, which is roughly the storage of a hundred and twenty-five large hard drives moved every second. Nothing at either end of such a link could produce or absorb data at that rate; the figure describes the medium's capacity rather than any use of it.

At the network level the unit is used for aggregates. The total interconnect capacity of a very large data centre, the summed capacity of all the cables landing on a continent, and the peak traffic of the largest content networks are quoted in petabits per second. These are sums over thousands of links, not the rating of any one.

The trajectory is worth noting. Transoceanic capacity has grown by roughly a factor of ten every seven or eight years for several decades, driven almost entirely by better electronics and better coding rather than by more glass. If that continues, the petabit per second will describe a working cable within a generation.

One petabit per second equals 1,000 terabits per second, 125 teraoctets per second, or about 0.8882 pebibits per second.