Conversion from 4 Square yards to Square hectometers

Information about the Square yard (sq yd)

The square yard is a unit of area equal to nine square feet, or 0.83612736 square metres exactly. Its symbol is sq yd, sometimes written yd². It is the area of a square one yard on a side, and 4840 of them make an acre. It occupies the awkward middle of the imperial ladder: too large for a workshop, too small for a field, and used mainly for surfaces that are laid rather than built.

Ground coverings are its main business. Turf is sold and laid by the square yard, asphalt paving and road resurfacing are measured in square yards in the United States, and carpet was priced that way for most of the twentieth century before American retailers moved to the square foot. Anything that arrives on a roll or a pallet and is spread out tends to be counted in this unit.

Textiles use it in an indirect but important way. Cloth is bought by the linear yard off a roll of known width, but its weight is specified in ounces per square yard, which is what allows two fabrics of different widths to be compared. A shirting might be four ounces per square yard and a heavy canvas eighteen, and those numbers describe the cloth more usefully than any measurement of the bolt does.

It also carries a large part of the South Asian property market. In Pakistan and northern India, plots are commonly sold in gaz, which is the square yard under a local name, so a house plot might be advertised at 240 gaz. Larger holdings switch to the marla and the kanal, both of which are defined as multiples of the square yard, so the whole regional system rests on this unit even where the English name is never used.

Its relationship to the rest of the imperial ladder is unusually clean at one step and unusually messy at the next. Nine square feet is easy; 1296 square inches and 4840 to the acre are not. That mixture is characteristic of a system built from body measures and ploughing practice rather than from a single decimal idea.

Conversion to metric is exact but not memorable: one square yard is 0.83612736 square metres and one square metre is 1.19599 square yards. A rough rule that a square metre is about a fifth larger than a square yard is close enough for judging a room, though not for ordering material.

One square yard equals 9 square feet, 1296 square inches, about 0.8361 square metres, or about 0.000207 acres.

Information about the Square hectometer (hm²)

The square hectometre is a unit of area equal to ten thousand square metres. It is written hm², and it is the area of a square one hundred metres on a side, since a hectometre is one hundred metres. It is exactly one hectare, and the two names describe the same quantity by two different routes.

The routes are worth distinguishing. The hectare is built by putting the prefix hecto in front of the are, so it is a hundred ares. The square hectometre is built by squaring a prefixed length, which is how the International System forms every derived area. The second construction is the strictly coherent one; the first is the one written on every land title in the world.

That difference explains where each name is found. Hectare appears in agriculture, forestry, planning, taxation and international statistics. Square hectometre appears mainly in technical and cartographic work in Spanish-speaking countries, where the hectometre is a familiar prefixed length for other reasons, and in documents where an author has chosen to keep every unit inside strict SI form.

The related cubic form is genuinely common in one field. Spanish and Latin American hydrology reports reservoir capacity and river flow in cubic hectometres, a cubic hectometre being one million cubic metres, so a reservoir holding 500 hm³ is holding half a cubic kilometre of water. Readers used to seeing hm in that context find hm² unremarkable, which is much of why the form survives there and almost nowhere else.

For scale, ten thousand square metres is a square one hundred metres on a side. That is about one and a half association football pitches, a large city block, or a good-sized field. It is the largest area that can still be walked around comfortably in a couple of minutes, and it is where land measurement stops being architectural and starts being agricultural.

When converting, the two names need no arithmetic between them: one square hectometre is one hectare exactly. Going further, multiply by ten thousand for square metres or divide by a hundred for square kilometres, and remember that the imperial comparison, 2.471 acres, is the same for both names.

One square hectometre equals 10,000 square metres, 1 hectare, 0.01 square kilometres, or about 2.471 acres.