Conversion from 4 Petabits per second to Octets per second

Information about the Petabit per second (Pbit/s)

The petabit per second is a unit of data transfer rate equal to a thousand terabits per second. Its symbol is Pbit/s. It marks the frontier of optical transmission research: the rate at which laboratories have carried data down a single strand of glass, and which no deployed system yet approaches.

The records were set by combining three techniques. Multi-core fibre puts several separate light-guiding paths inside one cladding, so that a single strand behaves like a bundle. Wavelength division multiplexing runs hundreds of distinct colours down each of those cores. Advanced modulation encodes many bits into each pulse. Multiplying the three together is what reaches a petabit per second.

Such demonstrations run over tens of kilometres of fibre in controlled conditions, not the thousands of kilometres a working sea cable must span. Distance is the hard part: signals attenuate, dispersion smears pulses together, and non-linear effects in the glass grow with power. Every kilometre added makes the same rate harder to sustain, which is why deployed cables sit two orders of magnitude below the laboratory record.

In octets a petabit per second is 125 teraoctets per second, which is roughly the storage of a hundred and twenty-five large hard drives moved every second. Nothing at either end of such a link could produce or absorb data at that rate; the figure describes the medium's capacity rather than any use of it.

At the network level the unit is used for aggregates. The total interconnect capacity of a very large data centre, the summed capacity of all the cables landing on a continent, and the peak traffic of the largest content networks are quoted in petabits per second. These are sums over thousands of links, not the rating of any one.

The trajectory is worth noting. Transoceanic capacity has grown by roughly a factor of ten every seven or eight years for several decades, driven almost entirely by better electronics and better coding rather than by more glass. If that continues, the petabit per second will describe a working cable within a generation.

One petabit per second equals 1,000 terabits per second, 125 teraoctets per second, or about 0.8882 pebibits per second.

Information about the Octet per second (octet/s)

The octet per second is a unit of data transfer rate equal to eight bits per second. Its symbol is octet/s. It is the unit in which software reports transfer speeds, as against the bits per second in which hardware and network services advertise them, and the factor of eight between the two conventions is the source of endless confusion.

The division of labour is consistent once it is understood. Anything describing a physical link — an Ethernet port, a fibre connection, a radio channel, a broadband package — is quoted in bits per second, because bits are what the signalling actually carries. Anything describing a file moving from one place to another is quoted in octets per second, because files are measured in octets.

A download manager that reports 12 megaoctets per second on a connection sold as 100 megabits per second is not disagreeing with the advertisement; it is stating the same rate in the other convention, and the arithmetic between them is a division by eight. Recognising this immediately removes the most common cause of complaint about internet speed.

Individual octets per second appear in the same narrow places as individual bits: deep-space telemetry, low-power sensor links, and the slowest legacy serial connections. A rate of a hundred octets per second would move a page of text in about twenty seconds, which was a normal experience in the 1970s and is unimaginable now.

The unit also underlies the way disc and interface throughput is described. A drive that sustains 500 megaoctets per second is moving four gigabits per second across its interface, and matching the two figures is a routine part of system design: an interface rated in gigabits must be compared with a drive rated in octets, and the factor of eight decides whether one starves the other.

Storage tools reinforce the convention. Every file copy utility, backup program and command-line transfer tool reports in octets per second or its multiples, and every network measurement tool reports in bits per second. A person reading both at once has to keep the conversion in mind, which is exactly what makes the distinction worth stating explicitly.

One octet per second equals 8 bits per second, 0.008 kilobits per second, or 0.001 kilooctets per second.