Conversion from 4 Gallons to Gills

=

Invert

Formula to convert Gallons (gal) to Gills (gi)

More information

Gallons to Gills conversion table

Gallons (gal)Gills (gi)
1 Gallon32 gi
2 Gallons64 gi
3 Gallons96 gi
4 Gallons128 gi
5 Gallons160 gi
10 Gallons320 gi
20 Gallons640 gi
25 Gallons800 gi
50 Gallons1600 gi
100 Gallons3200 gi

Volume reference points

ReferenceGallons (gal)Gills (gi)
A teaspoon0.00109985 gal0.0351951 gi
A can of soft drink0.0725899 gal2.32288 gi
A wine bottle0.164977 gal5.27926 gi
A bathtub32.9954 gal1055.85 gi
An Olympic swimming pool549923 gal17597540 gi

Try our other unit converters

LengthMassTemperatureEnergyVolumeSpeedTimeDataPressureFrequencyData-transfer rateVolumetric flow rateAngleArea

Information about the Gallon (gal)

The gallon in the imperial system is a unit of volume equal to exactly 4.54609 litres. Its symbol is gal. It contains four quarts, eight pints and 160 imperial fluid ounces, and it is about a fifth larger than the United States gallon, a difference that causes more confusion than any other single discrepancy between the two systems.

Its original definition was elegant. The Weights and Measures Act of 1824 fixed the imperial gallon as the volume occupied by ten pounds of distilled water at sixty-two degrees Fahrenheit under a barometric pressure of thirty inches of mercury. That tied liquid measure directly to the avoirdupois pound, so a gallon of water weighed ten pounds and a pint weighed a pound and a quarter. In 1985 the definition was replaced by the exact metric figure, but the old relationship still holds to within a fraction of a per cent.

Fuel economy keeps it in daily use. British and Irish drivers describe consumption in miles per gallon even though fuel has been sold in litres since the 1990s, and the figure is an imperial one. The same car scores about twenty per cent higher in British miles per gallon than in American, purely because the gallon is larger, which is why cross-Atlantic comparisons of efficiency are meaningless unless the gallon is specified.

Legal use in Britain is now narrow but real. Draught beer and cider must be sold in pints, half pints or third pints, and milk in returnable containers may be sold in pints, which keeps the whole imperial chain alive by keeping its smallest working member alive. Several Caribbean territories still sell motor fuel by the imperial gallon.

The difference from the American gallon is worth stating plainly. One imperial gallon is 4.546 litres and one United States gallon is 3.785, so an imperial gallon is 1.2 United States gallons. Recipes, fuel figures, tank capacities and chemical dilutions all break if the wrong one is assumed, and the error is large enough to matter but small enough to look plausible.

Below it the chain runs quart, pint, gill and fluid ounce, each a quarter or a fifth of the one above rather than a decimal step. That structure was designed for dividing a container by halving it repeatedly, which is a practical merit when pouring and a serious nuisance when calculating.

One imperial gallon equals 4.54609 litres, 8 imperial pints, 160 imperial fluid ounces, or about 1.201 US gallons.


Information about the Gill (gi)

The gill is a unit of volume equal to a quarter of an imperial pint, or exactly 142.0653125 millilitres. Its symbol is gi. It is five imperial fluid ounces, and it sits between the fluid ounce and the pint in the old British liquid chain. Its name is pronounced with a soft g, so that it sounds like the name Jill, which surprises most readers who meet it only in print.

For most of the twentieth century it governed the British pub. Spirits were served in fractions of a gill, and the fraction varied by region: a sixth of a gill in England and Wales, a fifth in Scotland, and a quarter in Northern Ireland. A traveller ordering the same drink in three cities therefore received three different quantities, all legally correct and all described by the same words.

That system ended in 1995, when the United Kingdom replaced the gill fractions with metric measures of 25 or 35 millilitres, each establishment choosing one and displaying which. The change was less disruptive than it looked, because a fifth of a gill is 28.4 millilitres and a quarter is 35.5, so the new measures sat close to the old ones and the drinks barely changed size.

Cookery kept it longer than the law did. British and Irish recipes written before the 1970s call for a gill of cream, stock or milk, and the quantity is a quarter pint, which is 142 millilitres. Anyone working from an inherited recipe book meets the word regularly, and the conversion is one of the few worth writing on the flyleaf.

The American gill is a different quantity again. It is a quarter of a United States liquid pint, therefore four United States fluid ounces or 118.3 millilitres, about a sixth smaller than the imperial gill. It appears in old American recipes and in the occasional bar manual, and the same caution applies as with the pint: the name says nothing about which system is meant.

Today the gill survives in dialect, in historical writing and in the specifications of glassware sold for period use. It is one of the clearest cases of a unit outliving its own function, kept alive by cookbooks and by the memory of how a drink used to be poured.

One imperial gill equals 142.065 millilitres, 5 imperial fluid ounces, 0.25 imperial pints, or about 1.201 US gills.