Conversion from 4 Atmospheres to Megapascals

Information about the Atmosphere (atm)

The atmosphere is a unit of pressure defined as exactly 101,325 pascals. Its symbol is atm. It is not a measurement of the air at any particular place or moment but a fixed reference value, chosen in 1954 by the General Conference on Weights and Measures to sit close to the average pressure at sea level in temperate latitudes.

Its usefulness is that it turns pressure into a ratio. Saying that a vessel holds gas at six atmospheres says immediately that the pressure inside is six times what is outside, which is the fact that determines whether a container will burst, how much gas it holds and how fast it will empty. No other pressure unit carries that meaning in the number itself.

Chemistry built its early framework on it. Gas laws were written with pressures in atmospheres, the gas constant had a value tailored to litres and atmospheres, and standard conditions for tabulating thermodynamic data were defined at one atmosphere. In 1982 the International Union of Pure and Applied Chemistry changed the standard state to exactly one bar, so modern tables use bar and older ones use atmospheres, and the difference of 1.3 per cent matters in careful work.

Diving and hyperbaric medicine still count in it. Pressure underwater is described in atmospheres absolute, a diver at thirty metres experiencing about four, and hyperbaric oxygen therapy is delivered at two to three atmospheres absolute in a sealed chamber. Because gas volume and gas uptake by the body both scale with absolute pressure, the unit is doing real physiological work rather than merely reporting a reading.

The atmosphere also fixes the older mercury scales. One atmosphere is exactly 760 millimetres of mercury by definition, which is what ties the torr and the millimetre of mercury to the metric system, and it is 29.92 inches of mercury, the setting an American pilot dials into an altimeter as standard.

A related unit, the technical atmosphere of one kilogram-force per square centimetre, is close but not equal at 98,066.5 pascals. Documents from Japan, Korea and eastern Europe sometimes use it, and mistaking one for the other introduces an error of about three per cent.

One atmosphere equals 101,325 pascals, 1.01325 bar, 760 millimetres of mercury, or about 14.696 pounds per square inch.

Information about the Megapascal (MPa)

The megapascal is a unit of pressure equal to one million pascals, written MPa. It is ten bar, and it is exactly one newton per square millimetre. That last identity is the reason the unit dominates engineering: a stress calculated from a force in newtons and an area in square millimetres comes out in megapascals with no conversion at all.

Materials strength is stated in it almost universally. A common structural steel yields at 355 megapascals, high-strength alloy steels at over a thousand, aluminium alloys between 200 and 500, and structural concrete at 25 to 50 in compression. Because those numbers are what a designer compares against a calculated stress, the megapascal is the unit in which most of the built world is specified.

Structural drawings often write N/mm² instead, and the two are the same. Some national codes prefer one form and some the other, but a plate marked 355 N/mm² and one marked 355 MPa carry identical steel. Knowing that they are the same unit removes what looks like a discrepancy between drawings from different countries.

Hydraulics works at these pressures too. Construction machinery runs at twenty to thirty-five megapascals, industrial presses higher, and water-jet cutting reaches four hundred, at which pressure a stream of water a fraction of a millimetre across will cut steel. Pressure vessels, pipelines and hydrogen storage are all designed and tested against figures in this range.

Above the megapascal, the gigapascal takes over for stiffness rather than strength. Young's modulus for steel is about 200 gigapascals, for aluminium 70 and for concrete 30, and those numbers describe how much a material deflects rather than when it breaks. Keeping strength in megapascals and stiffness in gigapascals is a convention that makes the two easy to tell apart at a glance.

For conversion, one megapascal is ten bar, 145 pounds per square inch, and just under ten atmospheres. The last comparison is worth holding: a pressure of one megapascal is about ten times what the air outside exerts, which puts even modest industrial pressures in a useful human perspective.

One megapascal equals 1,000,000 pascals, 10 bar, 1 newton per square millimetre, or about 145 pounds per square inch.