Conversion from 3 Terabits per second to Bits per second

=

Invert

Formula to convert Terabits per second (Tbit/s) to Bits per second (bit/s)

More information

Terabits per second to Bits per second conversion table

Terabits per second (Tbit/s)Bits per second (bit/s)
1 Terabit per second1000000000000 bit/s
2 Terabits per second2000000000000 bit/s
3 Terabits per second3000000000000 bit/s
4 Terabits per second4000000000000 bit/s
5 Terabits per second5000000000000 bit/s
10 Terabits per second10000000000000 bit/s
20 Terabits per second20000000000000 bit/s
25 Terabits per second25000000000000 bit/s
50 Terabits per second50000000000000 bit/s
100 Terabits per second100000000000000 bit/s

Data-transfer rate reference points

ReferenceTerabits per second (Tbit/s)Bits per second (bit/s)
A dial-up modem0.000000056 Tbit/s56000 bit/s
Typical home broadband0.0001 Tbit/s100000000 bit/s
Gigabit Ethernet0.001 Tbit/s1 × 109 bit/s
Streaming a 4K film0.000025 Tbit/s25000000 bit/s

Try our other unit converters

LengthMassTemperatureEnergyVolumeSpeedTimeDataPressureFrequencyData-transfer rateVolumetric flow rateAngleArea

Information about the Terabit per second (Tbit/s)

The terabit per second is a unit of data transfer rate equal to a thousand gigabits per second. Its symbol is Tbit/s. It is the unit of the internet's backbone: the submarine cables, the exchange points and the long-haul optical links that carry traffic between continents.

A single modern transoceanic cable carries several hundred terabits per second. It achieves this not with one enormous channel but with wavelength division multiplexing, which sends dozens of separate colours of light down each fibre at once, and with several fibre pairs in the same cable. Each wavelength carries a few hundred gigabits, and the totals add up.

The historical comparison is worth stating plainly. The first transatlantic telephone cable, laid in 1956, carried thirty-six simultaneous voice calls. A cable laid in the 2020s carries hundreds of terabits per second, enough for hundreds of millions of simultaneous calls. That is a factor of roughly ten million in seventy years, and it was achieved almost entirely by changing what is sent down the glass rather than by laying more cable.

Internet exchange points, where networks meet and hand traffic to one another, publish their throughput in terabits per second. The largest in Europe and Asia peak in the tens of terabits, and those public graphs are among the most reliable measurements of how heavily the internet is being used at a given moment, because they count real traffic rather than capacity.

In octets, a terabit per second is 125 gigaoctets per second — the contents of a large laptop's disc moved every second, continuously. No single storage system can feed such a link; the traffic on these routes is the aggregate of millions of separate connections, each of them tiny by comparison.

Laboratory records go far higher, into petabits per second, using multi-core fibre and hundreds of wavelengths at once, though over short distances under controlled conditions. The gap between what is demonstrated in a laboratory and what is deployed under an ocean has historically been about a decade.

One terabit per second equals 1,000 gigabits per second, 125 gigaoctets per second, or about 0.9095 tebibits per second.


Information about the Bit per second (bit/s)

The bit per second is the fundamental unit of data transfer rate. Its symbol is bit/s, often written bps. It counts how many binary decisions a channel carries in one second, and every other unit of transmission speed is a multiple of it.

Because it is a rate, it has the form of a quantity divided by time, exactly like metres per second or litres per second. That makes the arithmetic straightforward: a link running at a given number of bits per second, multiplied by a duration in seconds, gives the total number of bits transferred, and dividing by eight converts that to octets.

The unit must be distinguished from the baud, which counts symbols per second rather than bits. Early modems transmitted one bit per symbol, so the two numbers were the same and the words were used interchangeably. Modern schemes encode several bits in each symbol — by varying phase and amplitude together — so a channel running at 3,000 baud may carry 33,600 bits per second. Only the bit rate describes how much information moves.

Claude Shannon established the theoretical ceiling in 1948. The capacity of a channel in bits per second depends on its bandwidth and on the ratio of signal to noise, and no coding scheme can exceed it. Every advance in modem and radio design since has been an attempt to approach that limit more closely, and modern systems come within a fraction of a decibel of it.

In practice the raw bit rate of a link is never the rate at which useful data arrives. Protocol headers, error-correcting codes, acknowledgements and retransmissions all consume capacity, and the usable fraction is typically 90 to 95 per cent on a wired link and considerably less on a shared wireless one.

Single bits per second are rarely quoted, because almost every channel is faster. The exceptions are deep-space communication, where a probe billions of kilometres away may return data at a few tens of bits per second, and certain low-power sensor networks that transmit a handful of bits at long intervals to preserve battery life.

One bit per second equals 0.125 octets per second, 0.001 kilobits per second, or about 0.0009766 kibibits per second.