Conversion from 25 Bars to Pounds per square inch

Information about the Bar (bar)

The bar is a unit of pressure equal to exactly 100,000 pascals, or 100 kilopascals. Its symbol is bar. It is not part of the International System of Units, but it is tolerated alongside it and it is used throughout European engineering, because it happens to sit almost exactly on standard atmospheric pressure: one atmosphere is 1.01325 bar.

That coincidence is the whole reason for its success. A pressure quoted in bar can be read as very nearly a number of atmospheres, so a reading of six bar in a compressed air line means about six times the pressure outside, which is a fact an engineer can use without arithmetic. The name comes from the Greek word for weight, and the unit was proposed by the Norwegian meteorologist Vilhelm Bjerknes around 1909.

Diving uses it because the sea obliges. Every ten metres of seawater adds almost exactly one bar, so a diver at twenty metres is under three bar of absolute pressure, counting the atmosphere above. Decompression tables, gas consumption and cylinder pressures all follow from that one relationship, and the whole practice of diving is easier to teach in bar than in any other unit.

Everyday machinery works at a few bar. Car tyres are inflated to between two and two and a half, workshop compressed air runs at six to eight, mains water arrives at three to six, and an espresso machine extracts at nine, a figure so standard that it appears on the front of the machine. Watches carry water resistance ratings in bar, where ten bar corresponds nominally to a hundred metres of depth.

The distinction between gauge and absolute pressure matters more here than anywhere. A tyre gauge reading 2.2 bar means 2.2 bar above the surrounding air, so the absolute pressure inside is 3.2. Industrial practice writes barg for gauge and bara for absolute, and mixing the two is a common source of error in specifications and in safety calculations.

Standards bodies have discouraged the bar for decades in favour of the pascal, without much effect. The kilopascal is the coherent alternative and is used in Canada, Australia and parts of Asia, but a hundred kilopascals reads less naturally than one bar, and habit has proved stronger than the recommendation.

One bar equals 100,000 pascals, 100 kilopascals, 1000 millibars, or about 14.5 pounds per square inch.

Information about the Pound per square inch (psi)

The pound per square inch is a unit of pressure equal to 6894.76 pascals. Its symbol is psi. It is the force of one pound spread over one square inch, and it is the working pressure unit of the United States and of a great deal of equipment sold worldwide, because so much hydraulic and pneumatic machinery is designed to American specifications.

Its most familiar appearance is on tyres. A car is inflated to between 30 and 35 pounds per square inch, a bicycle tyre to 80 or more, and a heavy truck to around 100. Because the pressure and the contact patch together carry the vehicle, a small change in the figure changes handling, fuel consumption and tyre life, which is why it is printed inside the door of every car.

Compressed systems use the same scale. A workshop air line runs at 90 to 120 pounds per square inch, a domestic water supply arrives at 40 to 80, hydraulic machinery works at around 3000, and a full scuba cylinder holds 3000 or more. The convenient coincidence is that atmospheric pressure is 14.7 pounds per square inch, so a reading of 30 means roughly three times atmospheric in absolute terms.

That absolute distinction is written into the symbol. Engineers write psig for gauge pressure, measured above the surrounding air, and psia for absolute pressure, measured from vacuum. A tyre at 32 psig is at 46.7 psia, and confusing the two in a calculation of gas quantity or vessel strength produces an error of one atmosphere, which at low pressures is most of the answer.

Aviation uses it for cabin differential. An airliner maintains a pressure difference of about eight to nine pounds per square inch between cabin and outside air at cruising altitude, and the fuselage is designed and fatigue-tested against that repeated loading. The figure sets the effective cabin altitude and therefore how passengers feel at the end of a long flight.

Converting to metric is exact but not memorable, since a pound per square inch is 6894.76 pascals. The two rules of thumb worth carrying are that one bar is about 14.5 pounds per square inch and that one pound per square inch is about seven kilopascals; both are close enough for judging a gauge and neither is close enough for a design calculation.

One pound per square inch equals 6894.76 pascals, about 0.0689 bar, about 6.89 kilopascals, or about 0.068 atmospheres.