Conversion from 20 Deciares to Square kilometers

=

Invert

Formula to convert Deciares (da) to Square kilometers (km²)

More information

Deciares to Square kilometers conversion table

Deciares (da)Square kilometers (km²)
1 Deciare0.00001 km²
2 Deciares0.00002 km²
3 Deciares0.00003 km²
4 Deciares0.00004 km²
5 Deciares0.00005 km²
10 Deciares0.0001 km²
20 Deciares0.0002 km²
25 Deciares0.00025 km²
50 Deciares0.0005 km²
100 Deciares0.001 km²

Area reference points

ReferenceDeciares (da)Square kilometers (km²)
A sheet of A4 paper0.006237 da0.00000006237 km²
A tennis court26.08 da0.0002608 km²
A football pitch714 da0.00714 km²
One hectare1000 da0.01 km²
Central Park, New York341000 da3.41 km²

Try our other unit converters

LengthMassTemperatureEnergyVolumeSpeedTimeDataPressureFrequencyData-transfer rateVolumetric flow rateAngleArea

Information about the Deciare (da)

The deciare is a unit of area equal to one tenth of an are, or ten square metres. Its symbol is da. It completes the decimal ladder that the French metric law of 1795 built around the are, alongside the centiare below it and the hectare above, but unlike either of those it never found a job and is today the least used member of the family.

Ten square metres is an easily pictured quantity. It is a small bathroom, a single bedroom in a modest flat, or four fifths of a car parking space. It is the floor of a garden shed, the area a market trader is allotted at a fair, or the footprint of a large dining table with chairs pushed back. Nothing about the size is obscure; only the name is.

The reason it failed is structural. Land registration adopted a three-column system running hectare, are and centiare, each step a factor of one hundred, which mirrors how areas actually behave: squaring a tenfold change in length produces a hundredfold change in area. A tenth of an are sits between two columns and belongs to neither, so no register ever needed a place for it.

Its symbol makes matters worse. In the International System, da is the prefix symbol for deca, so a reader meeting da in a technical document is far more likely to take it as the start of a compound like dam or daN than as a unit in its own right. The decare, ten times larger, is written daa, which does nothing to help.

Where the quantity does need naming, ordinary metric notation handles it without effort. Ten square metres is written 10 m², which is shorter than one deciare, needs no explanation, and sorts correctly beside every other figure on a plan or in a contract.

The unit therefore survives almost entirely in conversion tables and in teaching material that runs through the complete prefix ladder. Encountering it in a real document usually means the document is old, translated from an older source, or reproducing a table rather than making a measurement, and converting it to square metres at once is the safe response.

One deciare equals 10 square metres, 0.1 ares, 0.001 hectares, or about 107.6 square feet.


Information about the Square kilometer (km²)

The square kilometre is a unit of area equal to one million square metres, or one hundred hectares. It is written km². It is the area of a square one kilometre on a side, and it is the unit in which countries, cities, lakes, forests and administrative districts are measured almost everywhere in the world.

Its main work is geography. Monaco covers about 2 square kilometres, Manhattan about 59, Greater London around 1572, and France some 551,500. Because the unit spans that whole range without changing, it makes very different places directly comparable, which is why atlases, censuses and statistical yearbooks settle on it rather than on hectares above and square metres below.

Population density is its most quoted derived figure. Dividing inhabitants by square kilometres produces a number that is meaningful at every scale: a few per square kilometre across Mongolia or the Australian interior, a few hundred across most of western Europe, and eight thousand or more in Singapore and central Paris. The same arithmetic done in square miles gives figures 2.6 times larger, which is a common source of confusion in translated sources.

It is worth being careful about the phrasing. A square kilometre is one kilometre by one kilometre. An area described as two kilometres square is two kilometres on each side and therefore four square kilometres, not two. The distinction sounds pedantic until a fire, a flood or a proposed development is being described, at which point the difference is a factor of the side length itself.

Environmental and infrastructure figures live here. Rainfall converts neatly: one millimetre falling on one square kilometre is a thousand cubic metres, or a million litres of water. A utility-scale solar farm producing a gigawatt at peak needs roughly twenty square kilometres of ground. Wildfire extent, glacier retreat, deforestation and sea-ice cover are all reported in square kilometres because that is the resolution at which satellites usefully see them.

Against imperial units it faces the square mile, which is 2.59 square kilometres. Because a square mile also equals 640 acres, the three units chain together awkwardly, and any figure that has passed through more than one of them is worth checking. Below the square kilometre, land measurement passes to the hectare, and one square kilometre is exactly one hundred of them.

One square kilometre equals 1,000,000 square metres, 100 hectares, about 0.386 square miles, or about 247.1 acres.