| Deciares (da) | Square hectometers (hm²) |
|---|---|
| 1 Deciare | 0.001 hm² |
| 2 Deciares | 0.002 hm² |
| 3 Deciares | 0.003 hm² |
| 4 Deciares | 0.004 hm² |
| 5 Deciares | 0.005 hm² |
| 10 Deciares | 0.01 hm² |
| 20 Deciares | 0.02 hm² |
| 25 Deciares | 0.025 hm² |
| 50 Deciares | 0.05 hm² |
| 100 Deciares | 0.1 hm² |
| Reference | Deciares (da) | Square hectometers (hm²) |
|---|---|---|
| A sheet of A4 paper | 0.006237 da | 0.000006237 hm² |
| A tennis court | 26.08 da | 0.02608 hm² |
| A football pitch | 714 da | 0.714 hm² |
| One hectare | 1000 da | 1 hm² |
| Central Park, New York | 341000 da | 341 hm² |
The deciare is a unit of area equal to one tenth of an are, or ten square metres. Its symbol is da. It completes the decimal ladder that the French metric law of 1795 built around the are, alongside the centiare below it and the hectare above, but unlike either of those it never found a job and is today the least used member of the family.
Ten square metres is an easily pictured quantity. It is a small bathroom, a single bedroom in a modest flat, or four fifths of a car parking space. It is the floor of a garden shed, the area a market trader is allotted at a fair, or the footprint of a large dining table with chairs pushed back. Nothing about the size is obscure; only the name is.
The reason it failed is structural. Land registration adopted a three-column system running hectare, are and centiare, each step a factor of one hundred, which mirrors how areas actually behave: squaring a tenfold change in length produces a hundredfold change in area. A tenth of an are sits between two columns and belongs to neither, so no register ever needed a place for it.
Its symbol makes matters worse. In the International System, da is the prefix symbol for deca, so a reader meeting da in a technical document is far more likely to take it as the start of a compound like dam or daN than as a unit in its own right. The decare, ten times larger, is written daa, which does nothing to help.
Where the quantity does need naming, ordinary metric notation handles it without effort. Ten square metres is written 10 m², which is shorter than one deciare, needs no explanation, and sorts correctly beside every other figure on a plan or in a contract.
The unit therefore survives almost entirely in conversion tables and in teaching material that runs through the complete prefix ladder. Encountering it in a real document usually means the document is old, translated from an older source, or reproducing a table rather than making a measurement, and converting it to square metres at once is the safe response.
One deciare equals 10 square metres, 0.1 ares, 0.001 hectares, or about 107.6 square feet.
The square hectometre is a unit of area equal to ten thousand square metres. It is written hm², and it is the area of a square one hundred metres on a side, since a hectometre is one hundred metres. It is exactly one hectare, and the two names describe the same quantity by two different routes.
The routes are worth distinguishing. The hectare is built by putting the prefix hecto in front of the are, so it is a hundred ares. The square hectometre is built by squaring a prefixed length, which is how the International System forms every derived area. The second construction is the strictly coherent one; the first is the one written on every land title in the world.
That difference explains where each name is found. Hectare appears in agriculture, forestry, planning, taxation and international statistics. Square hectometre appears mainly in technical and cartographic work in Spanish-speaking countries, where the hectometre is a familiar prefixed length for other reasons, and in documents where an author has chosen to keep every unit inside strict SI form.
The related cubic form is genuinely common in one field. Spanish and Latin American hydrology reports reservoir capacity and river flow in cubic hectometres, a cubic hectometre being one million cubic metres, so a reservoir holding 500 hm³ is holding half a cubic kilometre of water. Readers used to seeing hm in that context find hm² unremarkable, which is much of why the form survives there and almost nowhere else.
For scale, ten thousand square metres is a square one hundred metres on a side. That is about one and a half association football pitches, a large city block, or a good-sized field. It is the largest area that can still be walked around comfortably in a couple of minutes, and it is where land measurement stops being architectural and starts being agricultural.
When converting, the two names need no arithmetic between them: one square hectometre is one hectare exactly. Going further, multiply by ten thousand for square metres or divide by a hundred for square kilometres, and remember that the imperial comparison, 2.471 acres, is the same for both names.
One square hectometre equals 10,000 square metres, 1 hectare, 0.01 square kilometres, or about 2.471 acres.