| Deciares (da) | Ares (a) |
|---|---|
| 1 Deciare | 0.1 a |
| 2 Deciares | 0.2 a |
| 3 Deciares | 0.3 a |
| 4 Deciares | 0.4 a |
| 5 Deciares | 0.5 a |
| 10 Deciares | 1 a |
| 20 Deciares | 2 a |
| 25 Deciares | 2.5 a |
| 50 Deciares | 5 a |
| 100 Deciares | 10 a |
| Reference | Deciares (da) | Ares (a) |
|---|---|---|
| A sheet of A4 paper | 0.006237 da | 0.0006237 a |
| A tennis court | 26.08 da | 2.608 a |
| A football pitch | 714 da | 71.4 a |
| One hectare | 1000 da | 100 a |
| Central Park, New York | 341000 da | 34100 a |
The deciare is a unit of area equal to one tenth of an are, or ten square metres. Its symbol is da. It completes the decimal ladder that the French metric law of 1795 built around the are, alongside the centiare below it and the hectare above, but unlike either of those it never found a job and is today the least used member of the family.
Ten square metres is an easily pictured quantity. It is a small bathroom, a single bedroom in a modest flat, or four fifths of a car parking space. It is the floor of a garden shed, the area a market trader is allotted at a fair, or the footprint of a large dining table with chairs pushed back. Nothing about the size is obscure; only the name is.
The reason it failed is structural. Land registration adopted a three-column system running hectare, are and centiare, each step a factor of one hundred, which mirrors how areas actually behave: squaring a tenfold change in length produces a hundredfold change in area. A tenth of an are sits between two columns and belongs to neither, so no register ever needed a place for it.
Its symbol makes matters worse. In the International System, da is the prefix symbol for deca, so a reader meeting da in a technical document is far more likely to take it as the start of a compound like dam or daN than as a unit in its own right. The decare, ten times larger, is written daa, which does nothing to help.
Where the quantity does need naming, ordinary metric notation handles it without effort. Ten square metres is written 10 m², which is shorter than one deciare, needs no explanation, and sorts correctly beside every other figure on a plan or in a contract.
The unit therefore survives almost entirely in conversion tables and in teaching material that runs through the complete prefix ladder. Encountering it in a real document usually means the document is old, translated from an older source, or reproducing a table rather than making a measurement, and converting it to square metres at once is the safe response.
One deciare equals 10 square metres, 0.1 ares, 0.001 hectares, or about 107.6 square feet.
The are is a unit of area equal to one hundred square metres, written a. It is a square ten metres on a side. It was created by the French metric legislation of 1795 as the basic decimal unit of land, taking its name from the Latin word for a level open space, and it is the parent of the hectare that eventually overshadowed it.
The original scheme was tidy. The are would measure a garden or a plot, the hectare a field, and the centiare a single square metre, giving three decimal steps that covered everything from a doorway to a farm. In practice the middle rung carried almost all the weight: fields were described in hectares and buildings in square metres, and the are was left with the narrow band between.
It nevertheless survives in land registration, and there it is entirely alive. French, Belgian and Luxembourgish deeds record parcels as hectares, ares and centiares in three columns, so a plot might be written as 1 ha 25 a 30 ca, meaning 12,530 square metres. In Poland the ar is the ordinary way of describing a building plot, and in Indonesia and parts of central Europe it fills the same role.
For scale, one are is a square ten metres on a side: a generous garden, a small yard, or the footprint of a modest house with a little room to spare. A badminton court is a little over eight tenths of an are, a single-car garage about one fifth, and a tennis court about two and a half. It is the largest unit that still describes something a person can pace out in a few seconds.
In strict SI terms the are is exactly the square decametre, since a decametre is ten metres. The two are the same quantity written two ways, and the SI form is essentially never used, which makes the are one of the few cases where the older unit is the readable one.
Its main practical trap is the symbol. A single lower-case a is easily lost in running text or mistaken for an abbreviation, which is why deeds usually write it in a fixed column and why anything ambiguous is safer converted to square metres before it is passed on.
One are equals 100 square metres, 0.01 hectares, or about 1076.4 square feet.