Conversion from 2 Yobioctets per second to Pebibits per second

Information about the Yobioctet per second (Yio/s)

The yobioctet per second is a unit of data transfer rate equal to 1,024 zebioctets per second, or two to the eightieth power octets per second. Its symbol is Yio/s. It is the largest binary rate the International Electrotechnical Commission has named, and the last rung of the ladder that began with the bit per second.

At this final step the binary and decimal conventions differ by 20.9 per cent. That figure closes the argument the IEC prefixes were created to settle: a naming habit that was 2.4 per cent wrong at the kibibit per second has grown, through eight successive multiplications by 1.024, into a discrepancy of more than a fifth. No system of measurement can carry an ambiguity that large, and the whole binary series exists to remove it.

The rate itself has no referent. A yobioctet per second is more than eight million times the total instantaneous traffic of the internet, and it would transfer everything humanity has ever stored several thousand times over in a second. Nothing produces data at that rate, nothing consumes it, and nothing is designed with it in view.

That does not make the unit pointless. Defining the whole ladder in advance means that the rule — every prefix combines with every unit — is all anyone has to learn, and a rule is easier to carry than a table of exceptions. The same principle gave the metric system its complete prefix set, and the addition of ronna and quetta in 2022 extended the decimal side without any matching binary names being defined.

The practical value of a unit like this is that it makes a converter's behaviour uniform. A tool that handles the impossible cases by the same rule as the ordinary ones can be trusted not to have special cases hidden in it, and that is a property worth having in something whose whole purpose is to be relied upon.

For the reader, the whole series comes down to one character: Kio/s, Mio/s, Gio/s, Tio/s, Pio/s, Eio/s, Zio/s and Yio/s are binary; ko/s, Mo/s, Go/s, To/s, Po/s, Eo/s, Zo/s and Yo/s are decimal; and the difference between them widens from a rounding error to a fifth as you climb.

One yobioctet per second equals 1,024 zebioctets per second, 1,208,925,819,614,629,174,706,176 octets per second, or about 1.209 yottaoctets per second.

Information about the Pebibit per second (Pibit/s)

The pebibit per second is a unit of data transfer rate equal to 1,024 tebibits per second, which is two to the fiftieth power bits per second. Its symbol is Pibit/s. It is the binary counterpart of the petabit per second, and the two differ by 12.6 per cent.

No deployed system runs at this rate, and the unit therefore describes either an aggregate or a laboratory result. Optical transmission records set on single fibres reach a petabit per second, and the binary figure for the same experiment is 12.6 per cent lower — a difference that matters when comparing results between papers that use different conventions.

Where the unit is genuinely appropriate is in describing structures built from powers of two. The total switching capacity of a very large network fabric, built from ports and buffers that are all binary, is a binary quantity divided by time, and reporting it in decimal units discards the arithmetic that produced it. The same applies to the summed memory bandwidth of a machine whose channel count is a power of two.

In octets a pebibit per second is 140,737,488,355,328, which is 128 tebioctets per second. That is the storage of a thousand large consumer drives moved every second, and it exists only as a total across many thousands of parallel paths inside a single facility.

The size of the discrepancy at this level is the argument for the whole IEC series in miniature. What began as a harmless 2.4 per cent at the kibibit is now an eighth, and it compounds by 2.4 per cent at every further step. A convention that was acceptable for small numbers becomes untenable for large ones, and the point of the binary prefixes is to make the distinction visible before that happens.

For a converter, the arithmetic is unremarkable: multiply or divide by 1,024 the appropriate number of times, and by eight to reach octets. What matters is that the tool does not silently substitute the decimal unit when it sees a value it cannot label precisely.

One pebibit per second equals 1,024 tebibits per second, 140,737,488,355,328 octets per second, or about 1.126 petabits per second.