Conversion from 2 Mebioctets per second to Octets per second

Information about the Mebioctet per second (Mio/s)

The mebioctet per second is a unit of data transfer rate equal to 1,048,576 octets per second, which is 1,024 kibioctets per second. Its symbol is Mio/s. It is the unit that disc benchmarks, copy tools and backup programs report in, and one of the few binary units most people see regularly without noticing.

Storage measurement produces it naturally. A benchmark writes and reads blocks whose size is a power of two, times the operation, and divides. The result is a binary rate, and reporting it as such preserves the arithmetic. A tool that converted to decimal megaoctets would introduce a 4.9 per cent adjustment for no purpose other than to match a marketing convention.

That five per cent is exactly where the two conventions diverge visibly for consumers. A drive advertised at 550 megaoctets per second and measured at 524 mebioctets per second is performing precisely as claimed; the numbers differ only because one is decimal and the other binary. A great deal of complaint about storage performance is this arithmetic misread as a shortfall.

For everyday sizes, one mebioctet per second copies a photograph in three seconds and a two-gigaoctet film in about half an hour. Modern drives run hundreds or thousands of times faster, so the unit is now the resolution at which small differences are reported rather than the scale of the whole figure.

The unit also appears in memory and cache measurements, in database throughput reports and in the output of the low-level commands that write disc images. All of these count in binary blocks because the underlying structures are binary, and all of them report in mebioctets per second because that is what the count divided by the time actually gives.

The habit of writing the lowercase i is worth keeping. It costs one character and it tells a later reader which of two conventions produced the number, which is information that cannot be recovered from context once it has been left out.

One mebioctet per second equals 1,048,576 octets per second, 1,024 kibioctets per second, or about 1.049 megaoctets per second.

Information about the Octet per second (octet/s)

The octet per second is a unit of data transfer rate equal to eight bits per second. Its symbol is octet/s. It is the unit in which software reports transfer speeds, as against the bits per second in which hardware and network services advertise them, and the factor of eight between the two conventions is the source of endless confusion.

The division of labour is consistent once it is understood. Anything describing a physical link — an Ethernet port, a fibre connection, a radio channel, a broadband package — is quoted in bits per second, because bits are what the signalling actually carries. Anything describing a file moving from one place to another is quoted in octets per second, because files are measured in octets.

A download manager that reports 12 megaoctets per second on a connection sold as 100 megabits per second is not disagreeing with the advertisement; it is stating the same rate in the other convention, and the arithmetic between them is a division by eight. Recognising this immediately removes the most common cause of complaint about internet speed.

Individual octets per second appear in the same narrow places as individual bits: deep-space telemetry, low-power sensor links, and the slowest legacy serial connections. A rate of a hundred octets per second would move a page of text in about twenty seconds, which was a normal experience in the 1970s and is unimaginable now.

The unit also underlies the way disc and interface throughput is described. A drive that sustains 500 megaoctets per second is moving four gigabits per second across its interface, and matching the two figures is a routine part of system design: an interface rated in gigabits must be compared with a drive rated in octets, and the factor of eight decides whether one starves the other.

Storage tools reinforce the convention. Every file copy utility, backup program and command-line transfer tool reports in octets per second or its multiples, and every network measurement tool reports in bits per second. A person reading both at once has to keep the conversion in mind, which is exactly what makes the distinction worth stating explicitly.

One octet per second equals 8 bits per second, 0.008 kilobits per second, or 0.001 kilooctets per second.