Conversion from 10 Mebibits to Gigabits

=

Invert

Formula to convert Mebibits (Mibit) to Gigabits (Gbit)

More information

Mebibits to Gigabits conversion table

Mebibits (Mibit)Gigabits (Gbit)
1 Mebibit0.001048576 Gbit
2 Mebibits0.002097152 Gbit
3 Mebibits0.003145728 Gbit
4 Mebibits0.004194304 Gbit
5 Mebibits0.00524288 Gbit
10 Mebibits0.01048576 Gbit
20 Mebibits0.02097152 Gbit
25 Mebibits0.0262144 Gbit
50 Mebibits0.0524288 Gbit
100 Mebibits0.1048576 Gbit

Data reference points

ReferenceMebibits (Mibit)Gigabits (Gbit)
A plain text message (160 characters)0.0012207 Mibit0.00000128 Gbit
A three-minute MP322.8882 Mibit0.024 Gbit
A smartphone photo30.5176 Mibit0.032 Gbit
A high-definition film30517.6 Mibit32 Gbit
A dual-layer Blu-ray disc381470 Mibit400 Gbit

Try our other unit converters

LengthMassTemperatureEnergyVolumeSpeedTimeDataPressureFrequencyData-transfer rateVolumetric flow rateAngleArea

Information about the Mebibit (Mibit)

The mebibit is a unit of digital information equal to 1,048,576 bits, which is 1,024 kibibits or two to the twentieth power. Its symbol is Mibit. It is the binary counterpart of the megabit, and the difference between the two has grown to 4.9 per cent — small enough to be ignored casually, large enough to matter in a specification.

Its natural home is semiconductor memory, where capacity is fixed by the address lines on the chip. A memory die with twenty address bits can reach exactly 1,048,576 locations, so densities land on powers of two rather than on round decimal numbers. A chip described as 512 megabits in a catalogue is very often 512 mebibits in reality, which is 537 megabits, and the datasheet is where the truth is written.

That habit is old and deliberate. Semiconductor manufacturers have always sized memory in binary because the wiring makes any other choice wasteful: an address bus is a fixed number of lines, and using only part of the range it can reach throws away silicon. Storage manufacturers had no such constraint, which is precisely why the two industries diverged.

For a sense of quantity, a mebibit is 131,072 octets, or about 128 kibioctets. That is roughly the contents of a long book as plain text, or a single low-resolution image. In network terms it is a hundredth of a second of a gigabit link.

The IEC prefixes were introduced in 1998 partly because at this level and above the approximation stops being safe. Buying a component described as one megabit and receiving one mebibit is a five per cent surprise; at the tebibit the same confusion is a ten per cent surprise, and in a contract for a data centre that is a real sum of money.

Correct usage is now common in standards documents, in hardware datasheets and in operating system internals, and rare in advertising and consumer software. The best rule when reading a figure is to ask which industry produced it: if it describes memory or a chip, assume binary; if it describes storage or a link, assume decimal.

One mebibit equals 1,048,576 bits, 1,024 kibibits, 131,072 octets, or about 1.049 megabits.


Information about the Gigabit (Gbit)

The gigabit is a unit of digital information equal to one thousand million bits, or one billion in the short scale. Its symbol is Gbit. It is the unit that names the current standard of wired networking, and the word gigabit has become shorthand for a particular level of capability rather than merely a quantity.

Gigabit Ethernet, standardised in 1998 and 1999, carries one gigabit per second over ordinary twisted-pair copper cabling up to a hundred metres. It replaced the hundred-megabit standard that preceded it and remains the connection built into most computers, switches and routers. That single decision fixed the meaning of gigabit for a generation of engineers.

In octets, a gigabit is 125 megaoctets. A gigabit-per-second link therefore moves about 125 megaoctets each second in ideal conditions, so a two-gigaoctet film transfers in around sixteen seconds. Real transfers are slower because protocol overhead, disc speed and the far end of the connection all impose their own limits, and it is unusual for storage to keep up with the network at these rates.

Domestic fibre services now advertise gigabit speeds routinely, and in many countries the figure has become a marketing threshold rather than a technical one. Very few households can use it: a gigabit connection is enough to stream around two hundred high-definition video services at once. Its real benefit is not peak speed but headroom, since a link that is never near capacity has consistently low latency.

Memory chips are specified in gigabits for the same reason smaller ones are specified in megabits: the count reflects the number of storage cells on the die. An 8-gigabit chip holds one gigaoctet, and eight such chips make an 8-gigaoctet memory module. Flash memory follows the same convention, so a 512-gigabit flash die holds 64 gigaoctets.

Above the gigabit the scale continues in thousands. Ten-gigabit Ethernet is standard in data centres, forty and hundred-gigabit links join buildings and cities, and the backbone of the internet runs at multiples of these. Each step keeps the same relationship to the octet, and each step is quoted in bits per second because that is what the optics and the copper actually carry.

One gigabit equals 1,000,000,000 bits, 1,000 megabits, 125 megaoctets, or about 0.9313 gibibits.