Nanopascal (nPa)

Pressure unit · SI system

All units Pressure converter

The nanopascal is a unit of pressure equal to one billionth of a pascal. Its symbol is nPa. It marks the far end of the pressure scale, the region where the idea of pressure as a push on a surface stops being useful and becomes a statement about how few particles are present.

The clearest home for the unit is extreme high vacuum. Ordinary laboratory vacuum reaches millipascals; ultra-high vacuum, used for surface physics and for the beam pipes of particle accelerators, reaches micropascals. Below that lies extreme high vacuum at nanopascals and lower, and reaching it takes a sealed chamber, hours of baking at two hundred degrees to drive gas out of the metal itself, and pumps that trap molecules rather than push them.

At those pressures a chamber is not empty. A nanopascal still contains something like a quarter of a million molecules per cubic centimetre, which sounds like a great many until you compare it with the twenty-five billion billion in the same volume of room air. What matters is not the count but the mean free path: a molecule now travels thousands of kilometres before striking another, so it hits the walls long before it meets a neighbour.

That is exactly the point. Surface science needs a sample to stay clean for the length of an experiment, and at ordinary pressures a fresh surface is covered by a layer of adsorbed gas in about a nanosecond. At a nanopascal the same surface stays clean for days. The vacuum is not there to remove air but to buy time.

Space provides the natural comparison. Low Earth orbit is around a micropascal, still dense enough that the atmosphere drags on satellites and eventually pulls them down. Interplanetary space is nanopascals. Interstellar space is far lower still, roughly a femtopascal, which no terrestrial pump has ever matched — the best laboratory vacuums are still denser than the space between the stars.

Radiation pressure lands in similar territory. Sunlight falling on a perfectly absorbing surface at Earth's distance exerts about 4.5 micropascals, and at the distance of the outer planets it falls to nanopascals. Solar sails work with these numbers, which is why they must be enormous and light to gather a usable force.

One nanopascal equals 0.000000001 pascals, 0.001 micropascals, 1,000 picopascals, or about 0.000000000000145 pounds per square inch.

Nanopascal conversion table

UnitSymbol1 Nanopascal equals1 of these equalsConverter
MicropascalµPa0.001 µPa1000 nPaNanopascals to Micropascals
MillipascalmPa0.000001 mPa1000000 nPaNanopascals to Millipascals
CentipascalcPa0.0000001 cPa10000000 nPaNanopascals to Centipascals
DecipascaldPa0.00000001 dPa100000000 nPaNanopascals to Decipascals
PascalPa0.000000001 Pa1000000000 nPaNanopascals to Pascals
Newton per square meterN/m²0.000000001 N/m²1000000000 nPaNanopascals to Newtons per square meter
DecapascaldaPa1 × 10-10 daPa10000000000 nPaNanopascals to Decapascals
HectopascalhPa1 × 10-11 hPa100000000000 nPaNanopascals to Hectopascals
KilopascalkPa1 × 10-12 kPa1000000000000 nPaNanopascals to Kilopascals
Barbar1 × 10-14 bar100000000000000 nPaNanopascals to Bars
MegapascalMPa1 × 10-15 MPa1 × 1015 nPaNanopascals to Megapascals
GigapascalGPa1 × 10-18 GPa1 × 1018 nPaNanopascals to Gigapascals
TerapascalTPa1 × 10-21 TPa1 × 1021 nPaNanopascals to Terapascals
Atmosphereatm9.86923266716 × 10-15 atm101325000000000 nPaNanopascals to Atmospheres
Pound per square inchpsi1.4503773773 × 10-13 psi6894757293168 nPaNanopascals to Pounds per square inch
Kilopound per square inchksi1.45037743897 × 10-16 ksi6.894757 × 1015 nPaNanopascals to Kilopounds per square inch
Megapound per square inchMpsi1.45037743897 × 10-19 Mpsi6.894757 × 1018 nPaNanopascals to Megapounds per square inch