Decapascal (daPa)

Pressure unit · SI system

All units Pressure converter

The decapascal is a unit of pressure equal to ten pascals. Its symbol is daPa. Deca is the least used prefix in the metric system almost everywhere, but the decapascal is an exception, because one clinical discipline adopted it and has kept it: audiology measures the pressure inside the middle ear in decapascals.

Tympanometry is the test in question. A probe seals the ear canal and varies the air pressure in it while measuring how much sound the eardrum reflects, and the resulting curve is plotted against pressure in decapascals. The sweep runs from about plus 200 to minus 400, and the position of the peak shows the pressure at which the eardrum moves most freely, which is normally the pressure of the middle ear itself.

That single graph carries a great deal of clinical information. A peak near zero means the middle ear is at the same pressure as the room, which is the healthy state. A peak displaced towards minus 200 or beyond suggests the Eustachian tube is not equalising properly, and a flat curve with no peak at all suggests fluid behind the eardrum. Each of those readings is a position on a decapascal scale.

The unit was chosen for the same reason the hectopascal was chosen in meteorology. Middle-ear pressure had long been recorded in millimetres of water, and one millimetre of water is 0.98 decapascals, so switching to the metric unit left every clinical number and every published reference range almost unchanged. A change of unit that shifts the figures by two per cent is one that practitioners will actually accept.

Outside audiology the decapascal is essentially unused. Ventilation and building airtightness work at similar pressures, an airtightness test being run at fifty pascals, but those figures are written in pascals, and everything above them moves to hectopascals or kilopascals. The gap between one and a hundred pascals is otherwise unclaimed.

For scale, ten pascals is the pressure a light breeze exerts on a wall, or the difference between the two ends of a well-sealed corridor when a door opens. It is also roughly the pressure change from riding a lift up one floor, which is why ears sometimes need clearing in a tall building.

One decapascal equals 10 pascals, 0.1 hectopascals, about 1.02 millimetres of water, or about 0.00145 pounds per square inch.

Decapascal conversion table

UnitSymbol1 Decapascal equals1 of these equalsConverter
NanopascalnPa10000000000 nPa1 × 10-10 daPaDecapascals to Nanopascals
MicropascalµPa10000000 µPa0.0000001 daPaDecapascals to Micropascals
MillipascalmPa10000 mPa0.0001 daPaDecapascals to Millipascals
CentipascalcPa1000 cPa0.001 daPaDecapascals to Centipascals
DecipascaldPa100 dPa0.01 daPaDecapascals to Decipascals
PascalPa10 Pa0.1 daPaDecapascals to Pascals
Newton per square meterN/m²10 N/m²0.1 daPaDecapascals to Newtons per square meter
HectopascalhPa0.1 hPa10 daPaDecapascals to Hectopascals
KilopascalkPa0.01 kPa100 daPaDecapascals to Kilopascals
Barbar0.0001 bar10000 daPaDecapascals to Bars
MegapascalMPa0.00001 MPa100000 daPaDecapascals to Megapascals
GigapascalGPa0.00000001 GPa100000000 daPaDecapascals to Gigapascals
TerapascalTPa1 × 10-11 TPa100000000000 daPaDecapascals to Terapascals
Atmosphereatm0.0000986923266716 atm10132.5 daPaDecapascals to Atmospheres
Pound per square inchpsi0.0014503773773 psi689.475729317 daPaDecapascals to Pounds per square inch
Kilopound per square inchksi0.00000145037743897 ksi689475.7 daPaDecapascals to Kilopounds per square inch
Megapound per square inchMpsi0.00000000145037743897 Mpsi689475700 daPaDecapascals to Megapounds per square inch