| Cubic feet per minute (ft³/min) | Cubic feet per second (ft³/s) |
|---|---|
| 1 Cubic foot per minute | 0.0166666666667 ft³/s |
| 2 Cubic feet per minute | 0.0333333333333 ft³/s |
| 3 Cubic feet per minute | 0.05 ft³/s |
| 4 Cubic feet per minute | 0.0666666666667 ft³/s |
| 5 Cubic feet per minute | 0.0833333333333 ft³/s |
| 10 Cubic feet per minute | 0.166666666667 ft³/s |
| 20 Cubic feet per minute | 0.333333333333 ft³/s |
| 25 Cubic feet per minute | 0.416666666667 ft³/s |
| 50 Cubic feet per minute | 0.833333333333 ft³/s |
| 100 Cubic feet per minute | 1.66666666667 ft³/s |
| Reference | Cubic feet per minute (ft³/min) | Cubic feet per second (ft³/s) |
|---|---|---|
| A domestic shower | 0.317832 ft³/min | 0.0052972 ft³/s |
| A kitchen tap | 0.353147 ft³/min | 0.00588578 ft³/s |
| A garden hose | 0.52972 ft³/min | 0.00882867 ft³/s |
| The Amazon river | 442845921 ft³/min | 7380765 ft³/s |
The cubic foot per minute is a unit of volumetric flow rate equal to one cubic foot passing a point every minute. Its symbol is ft³/min, universally abbreviated CFM. It is the working unit of air movement in the English-speaking world: fans, compressors, extractors and air conditioners are all sold by it.
Ventilation is specified in it throughout North America. An extractor fan over a domestic cooker is rated at 200 to 400 CFM, a bathroom fan at 50 to 110, a large commercial rooftop unit at several thousand, and a whole-house fan at 3,000 or more. Building codes give minimum rates per person or per square foot of floor, and the designer multiplies to reach the fan size.
Compressed air uses it with a qualifier that matters. A compressor is rated in standard cubic feet per minute, referred to a fixed temperature, pressure and humidity, because a cubic foot of air at 100 pounds per square inch contains far more air than one at atmospheric pressure. A tool that consumes 5 SCFM will starve on a compressor rated 5 CFM of displacement, since displacement and delivery are not the same number.
Dust extraction in woodworking is a familiar case. A table saw needs about 350 CFM at the port to capture chips, a planer 400 to 800, and a shop with several machines running needs the sum plus an allowance for duct losses. Since a blast gate closes off unused branches, the same collector can serve the whole shop one machine at a time.
Engine and vehicle work uses it too. A carburettor is rated in CFM, an engine's airflow at peak power is quoted in CFM, and a radiator fan moves 1,500 to 3,000. The rating is what determines whether the airflow matches the engine's demand at the speed it is designed to work hardest.
The conversions are worth learning: 1 CFM is about 0.4719 litres per second, about 1.699 cubic metres per hour, and 2,119 CFM is one cubic metre per second. European and American catalogues describe the same equipment in these different units, and the numbers only match once one of them is converted.
One cubic foot per minute equals about 0.4719 litres per second, about 1.699 cubic metres per hour, or about 7.481 US gallons per minute.
The cubic foot per second is a unit of volumetric flow rate equal to one cubic foot passing a point every second. Its symbol is ft³/s, and in hydrology it has a name of its own: the cusec. One cusec is about 28.32 litres per second, roughly the flow of a vigorous garden hose or a small brook.
American river gauging is entirely built on it. The United States Geological Survey publishes stream flow in cubic feet per second at thousands of gauges, water rights in the western states are granted in cusecs, and the Colorado's allocations between states rest on figures first written in this unit a century ago. The Mississippi at its mouth averages about 600,000 cubic feet per second.
Irrigation districts inherited it from the same tradition. A miner's inch, an older western measure, is defined in most states as a fixed fraction of a cusec, and a canal headgate is set to deliver a farmer's entitlement in cubic feet per second for a stated number of hours. The product of the two is the acre-foot, the volume unit that follows naturally from the cusec.
An easy approximation makes the unit memorable: one cubic foot per second flowing for twenty-four hours delivers almost exactly two acre-feet — 1.983, to be precise. Irrigation engineers use the round figure daily, since it converts a rate into a seasonal water budget in a single step.
Flood hydrology is written in it too. A design storm on a small catchment might produce a few hundred cubic feet per second, a major river flood tens or hundreds of thousands, and culverts, bridges and levees in the United States are sized against a peak discharge expressed exactly this way.
Its metric counterpart is the cubic metre per second, which is 35.31 times larger. Hydrological literature moves constantly between the two, and the ratio is worth remembering: a hundred cusecs is a little under three cubic metres per second, and a thousand cubic metres per second is a large river in anyone's units.
One cubic foot per second equals about 28.32 litres per second, about 0.02832 cubic metres per second, or about 448.8 US gallons per minute.