| Cubic feet per hour (ft³/h) | Fluid ounces per second (fl oz/s) |
|---|---|
| 1 Cubic foot per hour | 0.276837131493 fl oz/s |
| 2 Cubic feet per hour | 0.553674262987 fl oz/s |
| 3 Cubic feet per hour | 0.83051139448 fl oz/s |
| 4 Cubic feet per hour | 1.10734852597 fl oz/s |
| 5 Cubic feet per hour | 1.38418565747 fl oz/s |
| 10 Cubic feet per hour | 2.76837131493 fl oz/s |
| 20 Cubic feet per hour | 5.53674262987 fl oz/s |
| 25 Cubic feet per hour | 6.92092828734 fl oz/s |
| 50 Cubic feet per hour | 13.8418565747 fl oz/s |
| 100 Cubic feet per hour | 27.6837131493 fl oz/s |
| Reference | Cubic feet per hour (ft³/h) | Fluid ounces per second (fl oz/s) |
|---|---|---|
| A domestic shower | 19.0699 ft³/h | 5.27926 fl oz/s |
| A kitchen tap | 21.1888 ft³/h | 5.86585 fl oz/s |
| A garden hose | 31.7832 ft³/h | 8.79877 fl oz/s |
| The Amazon river | 2.65708 × 1010 ft³/h | 7.35577 × 109 fl oz/s |
The cubic foot per hour is a unit of volumetric flow rate equal to one cubic foot passing a point every hour. Its symbol is ft³/h, and in the gas trades it is abbreviated CFH. It is the unit of fuel gas supply throughout North America, where every appliance and every pipe is sized by it.
Natural gas is billed and metered in cubic feet, so the hourly rate is what a gas fitter works with. A domestic furnace consumes 80 to 150 cubic feet per hour, a water heater 40, a cooking range 65, and a whole house at design conditions perhaps 250. A residential meter is rated at 250 CFH and the service pipe at rather more.
Pipe sizing tables are built entirely around this unit. Given a length of pipe, a diameter and an allowable pressure drop, the table returns a capacity in cubic feet per hour, and the fitter compares it against the sum of the appliance ratings on that branch. Undersize the pipe and the burners starve when everything runs at once; oversize it and the material cost rises for no benefit.
The unit converts easily into heat. Natural gas carries roughly 1,000 British thermal units per cubic foot, so a rate in cubic feet per hour is very nearly the same number in thousands of British thermal units per hour. An appliance rated 100,000 British thermal units per hour therefore burns about 100 cubic feet per hour, which is why the two figures appear together on every rating plate.
Propane behaves differently and is worth stating separately. It carries about 2,500 British thermal units per cubic foot, so the same appliance needs less than half the volumetric flow, and a pipe sized for natural gas is generously large for propane. Confusing the two is a classic and dangerous error in the trade.
Beyond fuel gas, the unit describes slow air and gas flows in imperial practice: purge lines, instrument air, small blowers and laboratory gas supplies. Sixty cubic feet per hour is one cubic foot per minute, and 35.31 cubic feet per hour is one cubic metre per hour.
One cubic foot per hour equals about 0.02832 cubic metres per hour, about 28.32 litres per hour, or about 0.01667 cubic feet per minute.
The fluid ounce per second is a unit of volumetric flow rate equal to one imperial fluid ounce passing a point every second. Its symbol is fl oz/s. The imperial fluid ounce is 28.413 millilitres, defined as one twentieth of an imperial pint, so this unit describes the flow of a steady pour rather than a plumbing system.
Its natural home is the bar and the kitchen. A pint glass filled in twelve seconds is being poured at about 1.7 fluid ounces per second, and a bartender free-pouring spirits counts seconds against a known rate to measure a shot without a jigger. Automatic dispensing guns on a bar are calibrated in exactly these terms so that a portion is repeatable across a busy evening.
Beverage plants use it for filling heads. A bottling line filling half-litre bottles at 200 bottles a minute must deliver about 59 fluid ounces per second in total, divided among however many heads the filler carries. Each head's individual rate determines the fill time, and the fill time determines how fast the carousel can turn.
The unit persists in British and Commonwealth food and drink specifications, where recipes, dispense rates and portion controls have been written in fluid ounces for generations. A soft-drink dispenser is set so that the syrup and the carbonated water arrive in a fixed ratio, and both rates are naturally quoted in fluid ounces per second.
A warning belongs here: the American fluid ounce is 29.574 millilitres, about four per cent larger than the imperial one, and the American pint holds sixteen of them against the imperial twenty. A flow rate quoted in fluid ounces per second therefore differs by four per cent between the two systems, and by twenty per cent when the same number of ounces is called a pint.
For a sense of scale, 35 fluid ounces per second is about a litre per second, and one fluid ounce per second fills a pint in twenty seconds and a gallon in a little under three minutes. It is the rate of a fast tap or a generous jug.
One fluid ounce per second equals about 28.41 millilitres per second, about 0.02841 litres per second, or about 1.734 cubic inches per second.