Conversion from 50 Nanometers to Inches

=

Invert

Formula to convert Nanometers (nm) to Inches (in)

More information

Nanometers to Inches conversion table

Nanometers (nm)Inches (in)
1 Nanometer0.0000000393700787402 in
2 Nanometers0.0000000787401574803 in
3 Nanometers0.00000011811023622 in
4 Nanometers0.000000157480314961 in
5 Nanometers0.000000196850393701 in
10 Nanometers0.000000393700787402 in
20 Nanometers0.000000787401574803 in
25 Nanometers0.000000984251968504 in
50 Nanometers0.00000196850393701 in
100 Nanometers0.00000393700787402 in

Length reference points

ReferenceNanometers (nm)Inches (in)
A sheet of A4 paper (long side)297000000 nm11.6929 in
Average adult human height1.7 × 109 nm66.9291 in
A football pitch (length)1.05 × 1011 nm4133.86 in
A marathon4.2195 × 1013 nm1661220 in
Height of Mount Everest8.849 × 1012 nm348386 in

Try our other unit converters

LengthMassTemperatureEnergyVolumeSpeedTimeDataPressureFrequencyData-transfer rateVolumetric flow rateAngleArea

Information about the Nanometer (nm)

The nanometre is one billionth of a metre. It is formed by applying the SI prefix nano, meaning 10-9, to the metre, and is written nm. The prefix derives from the Greek nanos, meaning dwarf.

This is the working scale of modern optics and electronics. Visible light spans roughly 380 nm at the violet end to 750 nm at the red end, which makes the nanometre the standard unit for describing colour in physical terms. A laser pointer emitting at 532 nm is green; one at 650 nm is red. Ultraviolet light falls below 380 nm and infrared above 750 nm.

Biology uses the unit constantly. The DNA double helix is about 2 nm across. A typical virus measures between 20 and 300 nm. Cell membranes are around 7 nm thick. These dimensions sit below the resolution of conventional light microscopes, which is limited by the wavelength of the light itself to roughly 200 nm.

Semiconductor manufacturing made the nanometre familiar outside science. Process nodes have been labelled 90 nm, 45 nm, 14 nm, 5 nm and smaller. The figure no longer corresponds to any single measurable feature on the chip, having become a marketing designation rather than a physical dimension, but the underlying structures genuinely are nanometres across. A modern transistor gate is a few tens of atoms wide.

Nanotechnology takes its name from the unit and conventionally covers structures between 1 and 100 nm. Materials often behave differently in this range because surface effects begin to dominate bulk properties.

Measuring at this scale requires instruments that do not rely on visible light. Electron microscopes resolve features below one nanometre by using electrons, whose effective wavelength is far shorter than that of light. Atomic force microscopes work differently again, dragging a sharp tip across a surface and recording its deflection. Both were essential to the development of nanotechnology, since a field cannot advance far while its subject matter remains invisible.

One nanometre equals 10 ångströms, 1000 picometres, or 0.001 micrometres. A sheet of paper is roughly 100,000 nm thick.


Information about the Inch (in)

The inch is a unit of length equal to exactly 25.4 millimetres. It is one twelfth of a foot and one thirty-sixth of a yard. The symbol is in, though a double prime is common in technical contexts and a straight double quote is often substituted informally.

The name comes from the Latin uncia, meaning a twelfth part, which also gave English the word ounce. Early definitions were anatomical or agricultural. A statute of Edward II defined the inch as three barleycorns laid end to end, and the width of a man's thumb served as a working approximation in several European languages. Dutch and Swedish still use words for inch that mean thumb.

Its modern precision dates from 1959, when the International Yard and Pound Agreement fixed the yard at exactly 0.9144 metres across the United States, the United Kingdom, Canada, Australia, New Zealand and South Africa. Before that agreement the American and British inches differed very slightly, which mattered in precision manufacturing. The United States retained a separate survey inch for land measurement until it was formally retired at the end of 2022.

The inch remains dominant in several international industries regardless of local measurement systems. Screen sizes are quoted in inches worldwide, measured diagonally. Tyre rim diameters, bicycle wheel sizes, plumbing pipe bores and rack-mounted equipment all use inch designations, and the standard 19-inch rack is a global fixture. Photographic sensor sizes use inch fractions that no longer correspond to any real dimension, a survival from television camera tube measurements.

Subdivision is traditionally binary rather than decimal. An inch is halved repeatedly into eighths, sixteenths and thirty-seconds, which suits ruler markings and fits the fractional sizing of drill bits and spanners. Decimal inches are used in machining, where thousandths of an inch are called thou or mils.

Screens and printing keep it in daily use far outside the countries that use it for anything else. Televisions, monitors and phones are sold by the diagonal in inches everywhere, so a 55-inch television has the same name in Paris as in Chicago. Typography rests on the same base: there are 72 points to the inch, a convention inherited from the printing trade and written into every computer font system, and image resolution is quoted in dots or pixels per inch. Anyone laying out a page in a country that has been metric for a century is therefore working, without particular thought, in twelfths and seventy-seconds of an inch.

One inch equals 25.4 millimetres, 2.54 centimetres, or 0.0254 metres exactly.