Conversion from 50 Gigabits to Octets

Information about the Gigabit (Gbit)

The gigabit is a unit of digital information equal to one thousand million bits, or one billion in the short scale. Its symbol is Gbit. It is the unit that names the current standard of wired networking, and the word gigabit has become shorthand for a particular level of capability rather than merely a quantity.

Gigabit Ethernet, standardised in 1998 and 1999, carries one gigabit per second over ordinary twisted-pair copper cabling up to a hundred metres. It replaced the hundred-megabit standard that preceded it and remains the connection built into most computers, switches and routers. That single decision fixed the meaning of gigabit for a generation of engineers.

In octets, a gigabit is 125 megaoctets. A gigabit-per-second link therefore moves about 125 megaoctets each second in ideal conditions, so a two-gigaoctet film transfers in around sixteen seconds. Real transfers are slower because protocol overhead, disc speed and the far end of the connection all impose their own limits, and it is unusual for storage to keep up with the network at these rates.

Domestic fibre services now advertise gigabit speeds routinely, and in many countries the figure has become a marketing threshold rather than a technical one. Very few households can use it: a gigabit connection is enough to stream around two hundred high-definition video services at once. Its real benefit is not peak speed but headroom, since a link that is never near capacity has consistently low latency.

Memory chips are specified in gigabits for the same reason smaller ones are specified in megabits: the count reflects the number of storage cells on the die. An 8-gigabit chip holds one gigaoctet, and eight such chips make an 8-gigaoctet memory module. Flash memory follows the same convention, so a 512-gigabit flash die holds 64 gigaoctets.

Above the gigabit the scale continues in thousands. Ten-gigabit Ethernet is standard in data centres, forty and hundred-gigabit links join buildings and cities, and the backbone of the internet runs at multiples of these. Each step keeps the same relationship to the octet, and each step is quoted in bits per second because that is what the optics and the copper actually carry.

One gigabit equals 1,000,000,000 bits, 1,000 megabits, 125 megaoctets, or about 0.9313 gibibits.

Information about the Octet (octet)

The octet is a unit of digital information equal to exactly eight bits. Its symbol is octet, and its name comes from the Latin for a group of eight. It is the unit in which nearly all stored data is counted, and the reason it is called an octet rather than a byte is worth knowing.

A byte was originally the number of bits a machine used to hold one character, and that number was not fixed. Early computers used six-bit bytes, some used seven, and a few used nine. The IBM System/360 of 1964 settled on eight and its commercial success made eight the norm, but the word byte kept its older, machine-dependent meaning in specifications where ambiguity was dangerous.

The networking world therefore adopted octet. When a protocol standard says a header field is four octets long, no reader anywhere can interpret that as anything but thirty-two bits. The internet standards published by the IETF use octet throughout for exactly that reason, and French, Romanian and several other languages adopted the word for ordinary use as well, so that a hard disc sold in France is measured in gigaoctets.

Eight bits hold 256 distinct values, which is why so many things come in units of 256. A colour channel runs from 0 to 255. An IPv4 address is four octets, written as four numbers each between 0 and 255. The original ASCII character set used seven bits, leaving one spare, and the various eight-bit extensions that followed each filled that spare bit with a different set of accented letters — the mess that Unicode eventually replaced.

Modern text encoding still counts in octets. UTF-8 uses one octet for the unaccented Latin alphabet, two for most European accented letters and Greek and Cyrillic, three for Chinese, Japanese and Korean, and four for the rest. That is why the same sentence occupies different amounts of storage in different languages, and why a text-length limit measured in octets is not a limit on characters.

Storage capacity, file sizes, memory and network payloads are all quoted in octets or their multiples. Transmission rates are the exception, being quoted in bits per second, and the factor of eight between the two conventions is the single most common source of confusion in the field.

One octet equals 8 bits, 0.008 kilobits, or 0.001 kilooctets.