Conversion from 5 Hectares to Square millimeters

Information about the Hectare (ha)

The hectare is a unit of area equal to 10,000 square metres, written ha. It is a square one hundred metres on a side. It is not strictly an SI unit, but the International Bureau of Weights and Measures accepts it for use with the SI in the one field where it is indispensable: the measurement of land.

It descends from the are, a unit of one hundred square metres introduced in revolutionary France in 1795. The are proved too small for fields and the square kilometre too large, so the hundredfold multiple settled into the gap and outlived its parent entirely. Today almost nobody writes ares, while hectares appear on title deeds, farm subsidies and environmental reports across most of the world.

Agriculture is built on it. Crop yields are quoted in tonnes per hectare, and the figures carry a great deal of information in very little space: wheat in north-western Europe runs to about eight tonnes per hectare, against a world average nearer three. Wine appellations cap production in hectolitres per hectare, and European farm support has been paid per hectare rather than per tonne since the 1990s, which changed what farmers grew as much as any agronomic advance.

Environmental accounting uses the same unit. Deforestation, wetland loss, protected area and reforestation targets are all reported in hectares, because the quantity is large enough to describe a forest and small enough to describe a field. Urban planning uses it inverted, as dwellings per hectare, which is the standard way of comparing the density of one development with another.

For a sense of scale, an association football pitch of the usual size covers about 0.7 hectares, so a hectare is roughly a pitch and a half. A hectare of productive farmland feeds a handful of people on a mixed diet, and a hectare of dense city holds several hundred residents. Traditional Japanese and Korean land measures happen to land close by: one chō and one jeongbo are both about 0.99 hectares.

The imperial competitor is the acre, and the two do not convert cleanly: one hectare is 2.471 acres, and one acre is 0.4047 hectares. Where both systems are in use, as in Ireland, parts of Canada and much of South Asia, land is often quoted in both, and the conversion factor is one of the few worth committing to memory.

One hectare equals 10,000 square metres, about 2.471 acres, 0.01 square kilometres, or about 107,639 square feet.

Information about the Square millimeter (mm²)

The square millimetre is a unit of area equal to one millionth of a square metre, written mm². It is the area of a square one millimetre on a side. It is the standard unit of engineering cross-sections, and two of the most consequential numbers in construction and electrical work are expressed in it.

Electrical cable is the first of those. Outside North America, conductors are specified by their cross-sectional area in square millimetres: 1.5 mm² for lighting circuits, 2.5 mm² for socket outlets, 6 mm² for a cooker, and 16 or 25 mm² for a house supply. Current-carrying capacity follows the area closely, so a 2.5 mm² copper conductor safely carries about twenty amperes in ordinary domestic installation, and the whole of wiring regulation is built on that relationship.

North America uses American Wire Gauge instead, where the numbers run backwards and the steps are not proportional: gauge 14 is about 2.08 mm² and gauge 12 about 3.31. Converting between the two systems is one of the more error-prone tasks in electrical work, because a gauge number carries no information about area until it is looked up.

The second consequential use is stress. One newton per square millimetre is exactly one megapascal, which is why structural drawings state steel and concrete strengths in N/mm². A common structural steel is designated S355 because it yields at 355 newtons per square millimetre, and a concrete grade of C30/37 reaches 30 newtons per square millimetre in cylinder testing. Bolts are rated the same way, using their tensile stress area: an M10 bolt has 58 square millimetres of it.

Electronics measures its products here too. A large processor die covers between 300 and 600 square millimetres, and the cost of a chip is driven directly by that number because a wafer holds a fixed area. A full-frame camera sensor is 864 square millimetres against roughly 30 for a phone camera, which is most of the reason the two behave so differently in low light.

Below the square millimetre the metric ladder continues to the square micrometre, used for transistors and cell biology, but almost nothing in ordinary manufacturing needs to go further. Above it, the square centimetre takes over at a hundred square millimetres.

One square millimetre equals 0.01 square centimetres, 0.000001 square metres, or about 0.00155 square inches.