Conversion from 5 Exbibits to Pebibits

=

Invert

Formula to convert Exbibits (Eibit) to Pebibits (Pibit)

More information

Exbibits to Pebibits conversion table

Exbibits (Eibit)Pebibits (Pibit)
1 Exbibit1024 Pibit
2 Exbibits2048 Pibit
3 Exbibits3072 Pibit
4 Exbibits4096 Pibit
5 Exbibits5120 Pibit
10 Exbibits10240 Pibit
20 Exbibits20480 Pibit
25 Exbibits25600 Pibit
50 Exbibits51200 Pibit
100 Exbibits102400 Pibit

Data reference points

ReferenceExbibits (Eibit)Pebibits (Pibit)
A plain text message (160 characters)1.11022 × 10-15 Eibit1.13687 × 10-12 Pibit
A three-minute MP32.08167 × 10-11 Eibit0.0000000213163 Pibit
A smartphone photo2.77556 × 10-11 Eibit0.0000000284217 Pibit
A high-definition film0.0000000277556 Eibit0.0000284217 Pibit
A dual-layer Blu-ray disc0.000000346945 Eibit0.000355271 Pibit

Try our other unit converters

LengthMassTemperatureEnergyVolumeSpeedTimeDataPressureFrequencyData-transfer rateVolumetric flow rateAngleArea

Information about the Exbibit (Eibit)

The exbibit is a unit of digital information equal to two to the sixtieth power bits, which is 1,024 pebibits. Its symbol is Eibit. It is the binary counterpart of the exabit, and the two now differ by 15.3 per cent.

Two to the sixtieth is a number with a particular importance in computing, because sixty is close to the sixty-four bits of a modern processor address. A 64-bit machine can address sixteen exbioctets of memory, and that figure — 16 EiB — is the theoretical ceiling of the entire architecture. It appears in processor manuals, in operating system documentation and in the specification of every 64-bit filesystem.

No machine comes close to using that range. Current processors implement only forty-eight or fifty-seven of those sixty-four address bits, because wiring the full width would cost silicon for an address space nobody can fill. The unused bits are reserved, and widening the implementation is a straightforward matter whenever memory sizes make it worthwhile, which is the point of having chosen sixty-four in the first place.

An exbibit is 144,115,188,075,855,872 octets, or 128 pebioctets. That is more storage than any single organisation holds, and comparable to the combined annual output of a large part of the storage industry. As with all the larger binary units, it describes limits and capacities in specifications rather than anything that has been built.

The unit is also where filesystem designers set their maximum sizes. Filesystems built around 64-bit block pointers naturally have limits at exact powers of two, and several widely deployed ones specify maximum volume sizes in exbioctets. Those numbers are not aspirations; they are the arithmetic consequence of the pointer width, and they will hold until the architecture changes.

Reading the symbol correctly matters here. Eibit is the exbibit; Ebit is the exabit; EB and EiB are the octet forms of each. In a document where a fifteen per cent difference is significant — and at this scale it always is — the presence or absence of the lowercase i carries the entire meaning.

One exbibit equals 1,024 pebibits, 144,115,188,075,855,872 octets, or about 1.153 exabits.


Information about the Pebibit (Pibit)

The pebibit is a unit of digital information equal to 1,125,899,906,842,624 bits, which is 1,024 tebibits or two to the fiftieth power. Its symbol is Pibit. It is the binary counterpart of the petabit, and the gap between them has widened to 12.6 per cent.

That widening is worth watching, because it is the whole argument for the IEC prefixes in one number. Each step up the ladder multiplies the discrepancy by 1.024, so what began as a harmless 2.4 per cent at the kibibit is an eighth of the quantity here and a fifth at the yobibit. A convention that was reasonable for small numbers becomes indefensible for large ones.

A pebibit is 140,737,488,355,328 octets, or 128 tebioctets. Storage of this size exists in supercomputer memory systems, in the fastest scientific data buffers and in the aggregate memory of very large clusters. The largest machines on the list of the world's fastest computers have main memory measured in pebioctets, and the ability to hold an entire simulation in memory rather than on disc is what makes certain calculations feasible at all.

Because these systems are addressed in binary, the binary unit is the correct one and the decimal figure would be an approximation. A cluster with a pebibit of memory does not have a petabit; it has 12.6 per cent more, and a scheduler that allocated on the decimal figure would leave that much unused.

The unit also appears in filesystem limits. Several widely used filesystems have maximum volume or file sizes expressed as exact powers of two, and where those limits fall in this range they are naturally written in pebibytes or pebioctets. Documentation that converts them to decimal units loses the property that made them memorable.

In everyday computing the pebibit is never encountered. It belongs to specifications, to system architecture and to the design of the largest machines, and a converter needs it for exactly those documents. Anywhere the underlying quantity is a power of two, this is the unit that says so without rounding.

One pebibit equals 1,024 tebibits, 140,737,488,355,328 octets, or about 1.126 petabits.