Conversion from 3 Square chains to Square inches

Information about the Square chain (sq ch)

The square chain is a unit of area equal to 484 square yards, or 404.686 square metres. Its symbol is sq ch. It is the area of a square one chain on a side, a chain being 22 yards, and ten square chains make exactly one acre. That last relationship is the entire reason the unit exists.

The chain was invented by the English mathematician Edmund Gunter around 1620, and it was a physical object before it was a measurement: a steel chain of one hundred links, 22 yards long, that two people carried across a field. Its length was chosen so that ten square chains would be an acre and eighty chains would be a mile, which let a surveyor work in whole numbers and reach acres by shifting a decimal point.

That was a genuine achievement in an age before decimal calculation. Measurements taken in chains and links could be multiplied together and divided by ten to give acres directly, without the awkward factors of 4840 or 43,560 that the yard and the foot force on the same problem. For three centuries almost every land survey in Britain, Ireland, North America and the colonies was recorded this way.

The consequences outlived the tool. American public land records are written in chains, so deeds and plats still describe boundaries as so many chains and links, and anyone tracing an old title has to convert. Wildland firefighting in the United States measures fire line and fire perimeter in chains to this day, because the unit was already embedded in forestry practice when the agencies were formed.

One familiar object preserves the length exactly. A cricket pitch is one chain from wicket to wicket, twenty-two yards, which is why that number appears in the laws of the game and nowhere else in modern sport. Anyone who can picture a cricket pitch can picture a chain, and a square chain is that length squared, roughly a tenth of an acre or a large suburban garden.

For conversion, the useful facts are that ten square chains make an acre and that one square chain is about 405 square metres, so a hectare is nearly twenty-five square chains. Old surveys quoting areas in chains convert cleanly to acres and only awkwardly to metric, which is a good reason to do the acre step first.

One square chain equals 484 square yards, 0.1 acres, about 404.686 square metres, or about 0.0405 hectares.

Information about the Square inch (sq in)

The square inch is a unit of area equal to 6.4516 square centimetres exactly. Its symbol is sq in, sometimes written in². It is the area of a square one inch on a side, and one hundred and forty-four of them make a square foot. Its most important use is not as an area at all but as the denominator of the pound per square inch, the pressure unit that governs tyres, hydraulics and gas supply across the English-speaking world.

That pressure unit does most of the work. A car tyre is inflated to around 32 pounds per square inch, a bicycle tyre to 80 or more, a domestic water supply arrives at 40 to 60, and hydraulic machinery runs at several thousand. Because a hydraulic cylinder produces a force equal to pressure times piston area, the square inch is what turns a pressure gauge reading into a load, which is why the unit is printed on machinery even in workshops that measure everything else in millimetres.

Materials strength uses a multiple of it. Steel and aluminium are rated in thousands of pounds per square inch, written ksi, and a common structural steel yields near 50 ksi. Concrete in the United States is specified in pounds per square inch, with 3000 to 5000 typical for building work. The corresponding metric figures in megapascals are smaller by a factor of about 6.9, and mixing the two produces some of the most dangerous errors in engineering.

As a plain area it describes small flat things. A postage stamp is about one square inch, a large coin rather less, a credit card about 3.3, and the die inside a large processor around one. Gaskets, contact patches, wound dressings, printed labels and machined faces are all quoted in square inches in American workshops.

The conversion to metric is exact rather than approximate. Because the inch is defined as exactly 2.54 centimetres, one square inch is exactly 6.4516 square centimetres, or 645.16 square millimetres. The exactness is worth knowing, because it means a converted figure can be checked rather than merely trusted.

Its awkwardness lies in the ladder above it. A square foot is 144 square inches and a square yard is 1296, so imperial area arithmetic never reduces to shifting a decimal point. That is the practical reason engineering drawing in Britain moved to millimetres while American practice stayed with the inch and simply accepted the multiplication.

One square inch equals 6.4516 square centimetres, 645.16 square millimetres, or about 0.006944 square feet.