| Reference | Meters (m) | Millimeters (mm) |
|---|---|---|
| A sheet of A4 paper (long side) | 0.297 m | 297 mm |
| Average adult human height | 1.7 m | 1700 mm |
| A football pitch (length) | 105 m | 105000 mm |
| A marathon | 42195 m | 42195000 mm |
| Height of Mount Everest | 8849 m | 8849000 mm |
The metre is the base unit of length in the International System of Units, written m. Every other SI length unit is defined as a multiple or fraction of it, and units of area, volume, speed and many others are built from it in turn.
Its definition has been revised four times, each revision replacing a physical object with something more reproducible. The French Academy of Sciences proposed in 1791 that the metre should be one ten-millionth of the distance from the North Pole to the equator along the meridian through Paris. Surveying that arc took six years and produced a small error, since the Earth is not a perfect sphere. In 1889 the definition moved to a platinum-iridium bar held at Sèvres, near Paris, with copies distributed to signatory nations. In 1960 it was redefined as 1,650,763.73 wavelengths of orange-red light emitted by krypton-86.
The current definition dates from 1983 and is unusual in that it fixes a different quantity. The speed of light in vacuum is defined as exactly 299,792,458 metres per second, and the metre follows as the distance light travels in 1/299,792,458 of a second. Light speed is therefore no longer measured; it is a defined constant, and improvements in measurement now refine the metre rather than the speed.
The unit is used worldwide for building dimensions, athletics tracks, swimming pools, water depth, fabric and rope. Only a small number of countries retain imperial units for general purposes, and even there the metre dominates science and medicine.
Everyday reference points help fix the scale. A standard interior door is roughly two metres tall. A single stride for an adult is close to three quarters of a metre, which is why pacing is a workable rough measure of distance. The width of a single traffic lane is between three and three and a half metres in most countries.
One metre equals 100 centimetres, 1000 millimetres, or 0.001 kilometres. It is approximately 3.28084 feet, or 39.3701 inches.
The millimetre is one thousandth of a metre, written mm. It is the smallest division marked on most rulers and tape measures, which makes it the practical floor of everyday measurement in countries using the metric system.
Technical drawing has settled on the millimetre almost universally. Mechanical engineering drawings state dimensions in millimetres by default, usually without writing the unit at all, because the convention is understood. This avoids the decimal points that centimetres would introduce and the large numbers that micrometres would require. A component 45.5 mm long is easier to read and harder to misinterpret than one 4.55 cm or 45500 µm long.
Meteorology uses the millimetre for rainfall. A reading of 25 mm means that rain would stand 25 millimetres deep on a flat surface that did not drain, which corresponds to 25 litres per square metre. Snowfall is usually reported as depth in centimetres and separately as liquid water equivalent in millimetres.
Medicine relies on the unit for tumour dimensions, wound measurement and the size of anatomical structures on imaging. Ophthalmic prescriptions specify pupillary distance in millimetres. Blood pressure retains the older unit of millimetres of mercury, a pressure measurement whose name preserves the height of a mercury column.
Paper, sheet metal and glass are specified by thickness in millimetres. A standard sheet of office paper is about 0.1 mm thick. Domestic window glass is commonly 4 mm. Firearm and ammunition calibres are frequently given in millimetres, as in 9 mm.
Fastener sizes follow the unit closely. Metric bolts and screws are designated by their nominal diameter in millimetres, so an M8 bolt has an eight-millimetre thread. Spanner and socket sizes are marked the same way, measuring across the flats of the fastener head. This is why a metric toolkit contains an unbroken run of sizes rather than the fractional inch steps of an imperial set.
Medicine measures pressure with it as well as distance. Blood pressure is reported in millimetres of mercury, the height of a mercury column the pressure would support, so a healthy reading of 120 over 80 refers to two lengths rather than to any force directly. The convention dates from the mercury manometer and has survived every instrument that replaced it, because the numbers are familiar to every clinician alive. The same unit measures intraocular pressure in the eye, central venous pressure and the partial pressures of gases in blood, and it appears in vacuum work as the torr, which is one millimetre of mercury under another name.
One millimetre equals 1000 micrometres, 0.1 centimetres, or 0.001 metres. It is roughly 0.03937 inches, so 25.4 millimetres make exactly one inch.