| Reference | Acres (ac) | Square inches (sq in) |
|---|---|---|
| A sheet of A4 paper | 0.000015412 ac | 96.6737 sq in |
| A tennis court | 0.0644451 ac | 404241 sq in |
| A football pitch | 1.76433 ac | 11067022 sq in |
| One hectare | 2.47105 ac | 15500031 sq in |
| Central Park, New York | 842.629 ac | 5.28551 × 109 sq in |
The acre is a unit of area equal to 4046.86 square metres, or 43,560 square feet. Its symbol is ac. It is the principal land measure of the English-speaking world, and unlike most imperial units it survives not as a nostalgic remnant but as a legally operative measure in the United States, Britain, Ireland, India and much of the former British empire.
Its shape explains its odd size. The acre was defined as one chain by one furlong: a strip 22 yards wide and 220 yards long, which is the area a team of oxen was reckoned to plough in a day. Ploughing with oxen favoured long narrow strips because turning the team was slow, so the unit encodes a working method rather than a geometric idea, and that is why it is not a square number of anything.
The chain that fixes its width had a second life in surveying. Gunter's chain of 22 yards divides a mile into eighty parts and an acre into ten square chains, which made land arithmetic tractable before decimal calculation. American public land was surveyed on this basis, so a section is one square mile and contains exactly 640 acres, a quarter section 160, and those numbers still shape property boundaries across the western United States.
In practice the acre is used wherever land changes hands. Farms, building plots, forestry blocks and conservation holdings in the United States and Britain are advertised in acres, agricultural yields are quoted in bushels or tonnes per acre, and pesticide and fertiliser application rates are printed per acre on the label. In India and Pakistan the acre coexists with local units, and a Punjabi killa is an acre by another name.
A useful mental picture is that an acre is a little smaller than an association football pitch, which runs to about 1.76 acres. A city block in a gridded American town is often between two and five acres. A hectare, the metric competitor, is about two and a half acres, so converting between the two never gives a round number in either direction.
There is no single legal acre worldwide. The international acre, based on the international yard of exactly 0.9144 metres, is used almost everywhere; the United States survey acre, retired at the end of 2022, was larger by about two parts in a million, which matters only when re-tracing old survey lines across long distances.
One acre equals 4046.86 square metres, 43,560 square feet, 4840 square yards, or about 0.4047 hectares.
The square inch is a unit of area equal to 6.4516 square centimetres exactly. Its symbol is sq in, sometimes written in². It is the area of a square one inch on a side, and one hundred and forty-four of them make a square foot. Its most important use is not as an area at all but as the denominator of the pound per square inch, the pressure unit that governs tyres, hydraulics and gas supply across the English-speaking world.
That pressure unit does most of the work. A car tyre is inflated to around 32 pounds per square inch, a bicycle tyre to 80 or more, a domestic water supply arrives at 40 to 60, and hydraulic machinery runs at several thousand. Because a hydraulic cylinder produces a force equal to pressure times piston area, the square inch is what turns a pressure gauge reading into a load, which is why the unit is printed on machinery even in workshops that measure everything else in millimetres.
Materials strength uses a multiple of it. Steel and aluminium are rated in thousands of pounds per square inch, written ksi, and a common structural steel yields near 50 ksi. Concrete in the United States is specified in pounds per square inch, with 3000 to 5000 typical for building work. The corresponding metric figures in megapascals are smaller by a factor of about 6.9, and mixing the two produces some of the most dangerous errors in engineering.
As a plain area it describes small flat things. A postage stamp is about one square inch, a large coin rather less, a credit card about 3.3, and the die inside a large processor around one. Gaskets, contact patches, wound dressings, printed labels and machined faces are all quoted in square inches in American workshops.
The conversion to metric is exact rather than approximate. Because the inch is defined as exactly 2.54 centimetres, one square inch is exactly 6.4516 square centimetres, or 645.16 square millimetres. The exactness is worth knowing, because it means a converted figure can be checked rather than merely trusted.
Its awkwardness lies in the ladder above it. A square foot is 144 square inches and a square yard is 1296, so imperial area arithmetic never reduces to shifting a decimal point. That is the practical reason engineering drawing in Britain moved to millimetres while American practice stayed with the inch and simply accepted the multiplication.
One square inch equals 6.4516 square centimetres, 645.16 square millimetres, or about 0.006944 square feet.