| Decares (daa) | Square decimeters (dm²) |
|---|---|
| 1 Decare | 100000 dm² |
| 2 Decares | 200000 dm² |
| 3 Decares | 300000 dm² |
| 4 Decares | 400000 dm² |
| 5 Decares | 500000 dm² |
| 10 Decares | 1000000 dm² |
| 20 Decares | 2000000 dm² |
| 25 Decares | 2500000 dm² |
| 50 Decares | 5000000 dm² |
| 100 Decares | 10000000 dm² |
| Reference | Decares (daa) | Square decimeters (dm²) |
|---|---|---|
| A sheet of A4 paper | 0.00006237 daa | 6.237 dm² |
| A tennis court | 0.2608 daa | 26080 dm² |
| A football pitch | 7.14 daa | 714000 dm² |
| One hectare | 10 daa | 1000000 dm² |
| Central Park, New York | 3410 daa | 341000000 dm² |
The decare is a unit of area equal to ten ares, or one thousand square metres. Its symbol is daa. Ten decares make one hectare. Unlike the other members of the are family it is in daily commercial use, though under several different names, because it happened to match land measures that a number of countries were already using when they went metric.
Norway is the clearest case. The Norwegian mål was redefined as exactly one thousand square metres in the metrication of the late nineteenth century, and dekar has been the working unit of Norwegian farming and forestry ever since. Agricultural statistics, subsidy applications and farm sale advertisements are all written in dekar, and a typical Norwegian holding runs to a few hundred of them.
The eastern Mediterranean tells a similar story with different words. The Greek stremma became one thousand square metres on metrication in 1899, the Turkish dönüm was fixed at the same figure, and the metric dunam of Israel, Jordan and Iraq matches both. Bulgaria uses the decare directly, and its farm census is published in it. In each of these places a traditional unit of roughly this size was rounded to the metric value rather than abolished.
The reason it works is that a thousand square metres suits smallholdings. A hectare is a large field, and a hundred square metres is a garden; the decare falls between them, at about the size of an orchard plot, a vineyard parcel or a village building lot. It is also close to a quarter of an acre, which is why it reads naturally to people brought up with either system.
Reporting to international bodies converts it away. European Union agricultural returns, the statistics of the Food and Agriculture Organization and most academic work are all in hectares, so national figures in dekar or stremmata are divided by ten before they travel. This is a frequent source of order-of-magnitude errors in translated agricultural reporting, since a farm of 300 dekar is 30 hectares and not 300.
The symbol daa is awkward but unambiguous, being the deca prefix applied to the are. It should not be confused with da, which is the deciare and one hundred times smaller, nor with the prefix symbol da used before other units.
One decare equals 1000 square metres, 10 ares, 0.1 hectares, or about 0.247 acres.
The square decimetre is a unit of area equal to one hundredth of a square metre, or one hundred square centimetres. It is written dm². It is the area of a square ten centimetres on a side, which is about the size of a palm or a drinks coaster, and it sits in the gap between the square centimetre of small objects and the square metre of rooms.
The decimetre owes its survival to volume rather than to area. A cubic decimetre is exactly one litre, which quietly builds the prefix into the most used volume unit in the world, and a square decimetre is the cross-section of that litre cube. Anyone who can picture a litre carton already knows what a square decimetre looks like: it is the face of the box.
Its one substantial commercial home is the leather trade. Hides are irregular, so they are measured by area rather than by length, and European tanneries, shoe factories and leather goods makers buy and sell in square decimetres. A whole cowhide runs to something like 200 to 250 square decimetres, a lambskin to about 50, and prices, cutting yields and waste allowances are all calculated on that basis. British and American buyers use square feet for the same purpose, and one square foot is 9.29 square decimetres.
Everyday objects land conveniently on it. A sheet of A4 paper is 6.24 square decimetres, a standard floor tile of thirty centimetres is nine, and a large postage stamp is a small fraction of one. Schools use the unit for exactly this reason: it lets a class measure real objects without either very large or very small numbers, and it makes the squaring rule visible, since ten centimetres on a side gives a hundred square centimetres.
Outside those uses it is rare, and for the usual reason. Engineering standardised on prefixes that step by a factor of a thousand, so square millimetres, square metres and square kilometres cover everything in practice. Ten square decimetres is more naturally written as 0.1 square metres, which sorts correctly beside every other figure in a specification.
Converting is straightforward once the squaring is kept in mind. Multiply by a hundred for square centimetres, divide by a hundred for square metres, and remember that the factor between neighbouring units is the square of the factor between the lengths, not the factor itself.
One square decimetre equals 100 square centimetres, 0.01 square metres, or about 15.5 square inches.