| Reference | Chains (ch) | Micrometers (μm) |
|---|---|---|
| A sheet of A4 paper (long side) | 0.0147638 ch | 297000 μm |
| Average adult human height | 0.0845065 ch | 1700000 μm |
| A football pitch (length) | 5.21952 ch | 105000000 μm |
| A marathon | 2097.5 ch | 4.2195 × 1010 μm |
| Height of Mount Everest | 439.881 ch | 8.849 × 109 μm |
The chain is a unit of length equal to 66 feet, 22 yards, or exactly 20.1168 metres. It occupies an unusual position in the imperial system as the unit that connected everyday measurement to land surveying.
It is named after a physical object. Edmund Gunter, an English mathematician, introduced a surveying chain of 100 iron links in 1620. The design solved a real problem: land area was recorded in acres, a unit inherited from medieval agriculture, while distances were measured in feet and yards. Gunter chose a length that reconciled the two systems. Ten square chains make exactly one acre, and 80 chains make one mile, so a surveyor could measure in chains and compute both area in acres and distance in miles without awkward conversion factors.
The chain shaped the landscape of several countries. The United States Public Land Survey System, which divided much of the American west into townships and sections from 1785, was laid out in chains. A section is one square mile, or 80 chains on a side, and the resulting grid remains visible in road patterns and field boundaries across the Midwest. Similar surveys in Canada, Australia and New Zealand used the same unit, and older property deeds in those countries still cite chain measurements.
Cricket preserves it in sporting form. The pitch measures 22 yards between the wickets, which is exactly one chain, a length fixed long before the game's laws were formally written.
British railways continue to use the chain for locating features along a line. Positions are recorded as a mileage and a chain figure, so 12 miles 40 chains identifies a point precisely. The convention survives in signalling diagrams and engineering records despite general metrication.
The chain subdivides into 100 links of 7.92 inches each, giving surveyors a decimal subdivision within an otherwise non-decimal system.
One chain equals 22 yards, 66 feet, or 20.1168 metres.
The micrometre is one millionth of a metre, written µm using the Greek letter mu. It is also widely called the micron, a name the General Conference on Weights and Measures formally abolished in 1967 but which remains in everyday use across manufacturing and materials science.
The unit covers the scale of individual cells and fine particles. A human red blood cell is about 7 µm across. Bacteria typically measure 1 to 5 µm. Human hair ranges from roughly 17 to 180 µm in diameter, which is why hair is visible while cells are not. The limit of unaided human vision falls near 50 µm.
Air quality regulation relies on the micrometre. PM10 and PM2.5 refer to particulate matter smaller than 10 µm and 2.5 µm respectively. The distinction matters medically: larger particles are filtered by the nose and throat, while PM2.5 penetrates deep into the lungs and can enter the bloodstream.
Precision engineering works in the same range. Machining tolerances are commonly specified in micrometres, and surface roughness is quoted in the same unit. Bearing clearances, paint film thickness and the flatness of optical components are all measured this way. The measuring instrument called a micrometer, or micrometer screw gauge, is named for the precision it offers rather than for a fixed relationship to the unit.
Wavelengths in the infrared are usually given in micrometres rather than nanometres. Thermal imaging cameras typically operate between 8 and 14 µm, the band where objects at everyday temperatures emit most strongly.
Filtration is specified almost entirely in this unit. Water filters are rated by the smallest particle they retain, commonly between 0.2 and 50 µm, and a 0.2 µm filter is fine enough to remove most bacteria. Surgical masks and respirators are tested against particles in the same range. The N95 designation refers to a filter that captures at least 95 per cent of airborne particles at the hardest size to trap, around 0.3 µm.
Its older name still causes confusion. Until 1967 the unit was officially called the micron and written with a bare Greek mu, and the word remains common in industry even though the conference of that year removed it from the SI. Semiconductor manufacturing carried the name for a generation: chips were described by their process node in microns, falling from ten in the 1970s to below one by 1990, at which point the industry switched to nanometres and kept going. The modern node names no longer correspond to any physical dimension on the chip, but the earlier ones did, and they were quoted in exactly this unit.
One micrometre equals 1000 nanometres, 0.001 millimetres, or 10-6 metres.