| Reference | Yards (yd) | Millimeters (mm) |
|---|---|---|
| A sheet of A4 paper (long side) | 0.324803 yd | 297 mm |
| Average adult human height | 1.85914 yd | 1700 mm |
| A football pitch (length) | 114.829 yd | 105000 mm |
| A marathon | 46145 yd | 42195000 mm |
| Height of Mount Everest | 9677.38 yd | 8849000 mm |
The yard is a unit of length equal to exactly 0.9144 metres, or three feet. The symbol is yd. It is the base unit of the imperial and United States customary length systems, with the foot and inch defined as fractions of it.
That relationship is the reverse of what most people assume. Since 1959 the yard has been defined against the metre, and the foot and inch follow from it, so every imperial length unit is ultimately derived from an SI definition. The International Yard and Pound Agreement fixed the value at 0.9144 metres exactly, reconciling small differences between the American and British yards that had persisted for decades.
The origin of the name is uncertain. Old English gierd meant a rod or measuring stick. The frequently repeated story that Henry I defined the yard as the distance from his nose to his outstretched thumb is not supported by contemporary evidence, though it has proved durable. A physical standard yard bar was maintained in London from 1760, and its destruction in the 1834 Palace of Westminster fire forced a lengthy reconstruction from surviving copies.
Sport keeps the unit prominent. An American football field is 100 yards between goal lines, and the game's vocabulary is built around yardage. Golf course distances are marked in yards in Britain and the United States. Cricket sets the distance between wickets at 22 yards, a figure inherited from the surveyor's chain.
Fabric and carpet are sold by the yard in the United States, and textile widths are quoted in inches alongside. Landscaping materials such as topsoil and gravel are sold by the cubic yard, which is 27 cubic feet or about 0.7646 cubic metres.
Its cube runs the construction trade in North America. Concrete is ordered, delivered and billed by the cubic yard, about 0.765 cubic metres, and a standard mixer truck carries eight or nine of them; excavation, gravel, topsoil and demolition waste are all quoted the same way. Golf keeps the linear unit just as firmly, with every hole on every scorecard measured in yards and every club sold on the distance it carries, so a player who reads a shot as a hundred and fifty yards is using a measurement the rest of the game's arithmetic depends on. Between them the two uses make the yard unlikely to disappear.
One yard equals 3 feet, 36 inches, or 0.9144 metres exactly. It is a little shorter than a metre, by about 8.4 centimetres.
The millimetre is one thousandth of a metre, written mm. It is the smallest division marked on most rulers and tape measures, which makes it the practical floor of everyday measurement in countries using the metric system.
Technical drawing has settled on the millimetre almost universally. Mechanical engineering drawings state dimensions in millimetres by default, usually without writing the unit at all, because the convention is understood. This avoids the decimal points that centimetres would introduce and the large numbers that micrometres would require. A component 45.5 mm long is easier to read and harder to misinterpret than one 4.55 cm or 45500 µm long.
Meteorology uses the millimetre for rainfall. A reading of 25 mm means that rain would stand 25 millimetres deep on a flat surface that did not drain, which corresponds to 25 litres per square metre. Snowfall is usually reported as depth in centimetres and separately as liquid water equivalent in millimetres.
Medicine relies on the unit for tumour dimensions, wound measurement and the size of anatomical structures on imaging. Ophthalmic prescriptions specify pupillary distance in millimetres. Blood pressure retains the older unit of millimetres of mercury, a pressure measurement whose name preserves the height of a mercury column.
Paper, sheet metal and glass are specified by thickness in millimetres. A standard sheet of office paper is about 0.1 mm thick. Domestic window glass is commonly 4 mm. Firearm and ammunition calibres are frequently given in millimetres, as in 9 mm.
Fastener sizes follow the unit closely. Metric bolts and screws are designated by their nominal diameter in millimetres, so an M8 bolt has an eight-millimetre thread. Spanner and socket sizes are marked the same way, measuring across the flats of the fastener head. This is why a metric toolkit contains an unbroken run of sizes rather than the fractional inch steps of an imperial set.
Medicine measures pressure with it as well as distance. Blood pressure is reported in millimetres of mercury, the height of a mercury column the pressure would support, so a healthy reading of 120 over 80 refers to two lengths rather than to any force directly. The convention dates from the mercury manometer and has survived every instrument that replaced it, because the numbers are familiar to every clinician alive. The same unit measures intraocular pressure in the eye, central venous pressure and the partial pressures of gases in blood, and it appears in vacuum work as the torr, which is one millimetre of mercury under another name.
One millimetre equals 1000 micrometres, 0.1 centimetres, or 0.001 metres. It is roughly 0.03937 inches, so 25.4 millimetres make exactly one inch.