| Square decameters (dam²) | Decares (daa) |
|---|---|
| 1 Square decameter | 0.1 daa |
| 2 Square decameters | 0.2 daa |
| 3 Square decameters | 0.3 daa |
| 4 Square decameters | 0.4 daa |
| 5 Square decameters | 0.5 daa |
| 10 Square decameters | 1 daa |
| 20 Square decameters | 2 daa |
| 25 Square decameters | 2.5 daa |
| 50 Square decameters | 5 daa |
| 100 Square decameters | 10 daa |
| Reference | Square decameters (dam²) | Decares (daa) |
|---|---|---|
| A sheet of A4 paper | 0.0006237 dam² | 0.00006237 daa |
| A tennis court | 2.608 dam² | 0.2608 daa |
| A football pitch | 71.4 dam² | 7.14 daa |
| One hectare | 100 dam² | 10 daa |
| Central Park, New York | 34100 dam² | 3410 daa |
The square decametre is a unit of area equal to one hundred square metres. It is written dam², and it is the area of a square ten metres on a side, since a decametre is ten metres. It is exactly the same quantity as the are, and the choice between the two names is a choice between strict metric grammar and two centuries of habit.
The International System is built from coherent units, meaning every derived unit is a product or quotient of base units with no extra factors. Squaring a prefixed length gives a perfectly coherent area, so the square decametre needs no special permission to exist. The are, by contrast, is listed as a non-SI unit accepted for use with the SI, tolerated for land measurement rather than derived from anything.
Despite that formal advantage, the square decametre lost decisively. The are was already in every French land register when the modern system was codified, and a register does not change its columns for a matter of notation. The result is that the correct SI form is almost never written, and its accepted non-SI equivalent is what appears on deeds across half of Europe.
The quantity itself is a useful one to be able to picture, whichever name is used. A hundred square metres is a square ten metres on a side: a generous garden, the ground floor of a small house, a market stall pitch, or a large classroom. It is the last area a person can pace out accurately without instruments, and it is the natural size for describing a plot rather than a field.
Where the symbol does appear, the exponent must be read carefully. The string dam already means decametre, a length, so dam² and dam differ by an entire dimension, and a dropped superscript turns an area into a distance. Software that strips formatting from tables is a common cause of exactly that error.
For any practical purpose, converting is the right response. Multiply by a hundred for square metres, divide by a hundred for hectares, and the resulting figure will match whatever else is on the page. One square decametre is one are, and both are one hundred square metres, so nothing is lost in either direction.
One square decametre equals 100 square metres, 1 are, 0.01 hectares, or about 1076.4 square feet.
The decare is a unit of area equal to ten ares, or one thousand square metres. Its symbol is daa. Ten decares make one hectare. Unlike the other members of the are family it is in daily commercial use, though under several different names, because it happened to match land measures that a number of countries were already using when they went metric.
Norway is the clearest case. The Norwegian mål was redefined as exactly one thousand square metres in the metrication of the late nineteenth century, and dekar has been the working unit of Norwegian farming and forestry ever since. Agricultural statistics, subsidy applications and farm sale advertisements are all written in dekar, and a typical Norwegian holding runs to a few hundred of them.
The eastern Mediterranean tells a similar story with different words. The Greek stremma became one thousand square metres on metrication in 1899, the Turkish dönüm was fixed at the same figure, and the metric dunam of Israel, Jordan and Iraq matches both. Bulgaria uses the decare directly, and its farm census is published in it. In each of these places a traditional unit of roughly this size was rounded to the metric value rather than abolished.
The reason it works is that a thousand square metres suits smallholdings. A hectare is a large field, and a hundred square metres is a garden; the decare falls between them, at about the size of an orchard plot, a vineyard parcel or a village building lot. It is also close to a quarter of an acre, which is why it reads naturally to people brought up with either system.
Reporting to international bodies converts it away. European Union agricultural returns, the statistics of the Food and Agriculture Organization and most academic work are all in hectares, so national figures in dekar or stremmata are divided by ten before they travel. This is a frequent source of order-of-magnitude errors in translated agricultural reporting, since a farm of 300 dekar is 30 hectares and not 300.
The symbol daa is awkward but unambiguous, being the deca prefix applied to the are. It should not be confused with da, which is the deciare and one hundred times smaller, nor with the prefix symbol da used before other units.
One decare equals 1000 square metres, 10 ares, 0.1 hectares, or about 0.247 acres.