| Reference | Acres (ac) | Square decimeters (dm²) |
|---|---|---|
| A sheet of A4 paper | 0.000015412 ac | 6.237 dm² |
| A tennis court | 0.0644451 ac | 26080 dm² |
| A football pitch | 1.76433 ac | 714000 dm² |
| One hectare | 2.47105 ac | 1000000 dm² |
| Central Park, New York | 842.629 ac | 341000000 dm² |
The acre is a unit of area equal to 4046.86 square metres, or 43,560 square feet. Its symbol is ac. It is the principal land measure of the English-speaking world, and unlike most imperial units it survives not as a nostalgic remnant but as a legally operative measure in the United States, Britain, Ireland, India and much of the former British empire.
Its shape explains its odd size. The acre was defined as one chain by one furlong: a strip 22 yards wide and 220 yards long, which is the area a team of oxen was reckoned to plough in a day. Ploughing with oxen favoured long narrow strips because turning the team was slow, so the unit encodes a working method rather than a geometric idea, and that is why it is not a square number of anything.
The chain that fixes its width had a second life in surveying. Gunter's chain of 22 yards divides a mile into eighty parts and an acre into ten square chains, which made land arithmetic tractable before decimal calculation. American public land was surveyed on this basis, so a section is one square mile and contains exactly 640 acres, a quarter section 160, and those numbers still shape property boundaries across the western United States.
In practice the acre is used wherever land changes hands. Farms, building plots, forestry blocks and conservation holdings in the United States and Britain are advertised in acres, agricultural yields are quoted in bushels or tonnes per acre, and pesticide and fertiliser application rates are printed per acre on the label. In India and Pakistan the acre coexists with local units, and a Punjabi killa is an acre by another name.
A useful mental picture is that an acre is a little smaller than an association football pitch, which runs to about 1.76 acres. A city block in a gridded American town is often between two and five acres. A hectare, the metric competitor, is about two and a half acres, so converting between the two never gives a round number in either direction.
There is no single legal acre worldwide. The international acre, based on the international yard of exactly 0.9144 metres, is used almost everywhere; the United States survey acre, retired at the end of 2022, was larger by about two parts in a million, which matters only when re-tracing old survey lines across long distances.
One acre equals 4046.86 square metres, 43,560 square feet, 4840 square yards, or about 0.4047 hectares.
The square decimetre is a unit of area equal to one hundredth of a square metre, or one hundred square centimetres. It is written dm². It is the area of a square ten centimetres on a side, which is about the size of a palm or a drinks coaster, and it sits in the gap between the square centimetre of small objects and the square metre of rooms.
The decimetre owes its survival to volume rather than to area. A cubic decimetre is exactly one litre, which quietly builds the prefix into the most used volume unit in the world, and a square decimetre is the cross-section of that litre cube. Anyone who can picture a litre carton already knows what a square decimetre looks like: it is the face of the box.
Its one substantial commercial home is the leather trade. Hides are irregular, so they are measured by area rather than by length, and European tanneries, shoe factories and leather goods makers buy and sell in square decimetres. A whole cowhide runs to something like 200 to 250 square decimetres, a lambskin to about 50, and prices, cutting yields and waste allowances are all calculated on that basis. British and American buyers use square feet for the same purpose, and one square foot is 9.29 square decimetres.
Everyday objects land conveniently on it. A sheet of A4 paper is 6.24 square decimetres, a standard floor tile of thirty centimetres is nine, and a large postage stamp is a small fraction of one. Schools use the unit for exactly this reason: it lets a class measure real objects without either very large or very small numbers, and it makes the squaring rule visible, since ten centimetres on a side gives a hundred square centimetres.
Outside those uses it is rare, and for the usual reason. Engineering standardised on prefixes that step by a factor of a thousand, so square millimetres, square metres and square kilometres cover everything in practice. Ten square decimetres is more naturally written as 0.1 square metres, which sorts correctly beside every other figure in a specification.
Converting is straightforward once the squaring is kept in mind. Multiply by a hundred for square centimetres, divide by a hundred for square metres, and remember that the factor between neighbouring units is the square of the factor between the lengths, not the factor itself.
One square decimetre equals 100 square centimetres, 0.01 square metres, or about 15.5 square inches.