| Square hands (sq hh) | Square decimeters (dm²) |
|---|---|
| 1 Square hand | 1.032256 dm² |
| 2 Square hands | 2.064512 dm² |
| 3 Square hands | 3.096768 dm² |
| 4 Square hands | 4.129024 dm² |
| 5 Square hands | 5.16128 dm² |
| 10 Square hands | 10.32256 dm² |
| 20 Square hands | 20.64512 dm² |
| 25 Square hands | 25.8064 dm² |
| 50 Square hands | 51.6128 dm² |
| 100 Square hands | 103.2256 dm² |
| Reference | Square hands (sq hh) | Square decimeters (dm²) |
|---|---|---|
| A sheet of A4 paper | 6.04211 sq hh | 6.237 dm² |
| A tennis court | 25265.1 sq hh | 26080 dm² |
| A football pitch | 691689 sq hh | 714000 dm² |
| One hectare | 968752 sq hh | 1000000 dm² |
| Central Park, New York | 330344411 sq hh | 341000000 dm² |
The square hand is a unit of area equal to sixteen square inches, or 103.2256 square centimetres. Its symbol is sq hh. A hand is four inches, so a square hand is a square four inches on a side, roughly the area of an adult palm. It is a complete and consistent unit that almost nobody has ever needed, because the hand it derives from measures one thing only.
That one thing is horses. The height of a horse or pony is measured at the withers, the ridge between the shoulder blades, and it is given in hands almost everywhere in the world, including in countries that are otherwise entirely metric. A hand was fixed at four inches by an English statute of 1541 under Henry VIII, and the equestrian world has held to that figure ever since.
The notation contains a trap worth knowing. A horse described as 15.2 hands is not fifteen and two tenths but fifteen hands and two inches, which is 62 inches or 157.5 centimetres. The digit after the point runs from 0 to 3 and then rolls over, so 15.3 is followed by 16.0. Anyone converting a list of horse heights with ordinary decimal arithmetic will produce numbers that are wrong by up to three inches.
Where the boundary between pony and horse falls is decided by this measurement. Most classifications put it at 14.2 hands, which is 58 inches or 147.3 centimetres, and competition classes at every level are drawn on the same scale. Because a placing can depend on a fraction of an inch, official measurement is a regulated procedure carried out on a level surface by an approved measurer.
The area form has never followed the length into use. Body-derived units were invented for laying along things, the height of an animal, the length of a cloth, the depth of water, and not for enclosing ground, which is why the acre and the chain came from ploughing rather than from anatomy. A square hand is simply what appears when the rule for forming areas is applied to a unit that had no such purpose.
As a quantity it is easy enough to place. A hundred square centimetres is a large sticky note, a beer mat and a half, or the palm of a hand, which is the same comparison used to estimate burn area in first aid. Sixteen square hands make a square foot, and 2304 of them make a square yard.
One square hand equals 16 square inches, about 103.23 square centimetres, or about 0.0103 square metres.
The square decimetre is a unit of area equal to one hundredth of a square metre, or one hundred square centimetres. It is written dm². It is the area of a square ten centimetres on a side, which is about the size of a palm or a drinks coaster, and it sits in the gap between the square centimetre of small objects and the square metre of rooms.
The decimetre owes its survival to volume rather than to area. A cubic decimetre is exactly one litre, which quietly builds the prefix into the most used volume unit in the world, and a square decimetre is the cross-section of that litre cube. Anyone who can picture a litre carton already knows what a square decimetre looks like: it is the face of the box.
Its one substantial commercial home is the leather trade. Hides are irregular, so they are measured by area rather than by length, and European tanneries, shoe factories and leather goods makers buy and sell in square decimetres. A whole cowhide runs to something like 200 to 250 square decimetres, a lambskin to about 50, and prices, cutting yields and waste allowances are all calculated on that basis. British and American buyers use square feet for the same purpose, and one square foot is 9.29 square decimetres.
Everyday objects land conveniently on it. A sheet of A4 paper is 6.24 square decimetres, a standard floor tile of thirty centimetres is nine, and a large postage stamp is a small fraction of one. Schools use the unit for exactly this reason: it lets a class measure real objects without either very large or very small numbers, and it makes the squaring rule visible, since ten centimetres on a side gives a hundred square centimetres.
Outside those uses it is rare, and for the usual reason. Engineering standardised on prefixes that step by a factor of a thousand, so square millimetres, square metres and square kilometres cover everything in practice. Ten square decimetres is more naturally written as 0.1 square metres, which sorts correctly beside every other figure in a specification.
Converting is straightforward once the squaring is kept in mind. Multiply by a hundred for square centimetres, divide by a hundred for square metres, and remember that the factor between neighbouring units is the square of the factor between the lengths, not the factor itself.
One square decimetre equals 100 square centimetres, 0.01 square metres, or about 15.5 square inches.