Conversion from 2 Pints to US Dry pints

Information about the Pint (pt)

The pint in the imperial system is a unit of volume equal to exactly 568.26125 millilitres. Its symbol is pt. It is twenty imperial fluid ounces, an eighth of an imperial gallon, and half an imperial quart. It is the only imperial unit that most people in Britain and Ireland still use every week, and it survives because it is the legal measure for draught beer.

That legal status is precise. Draught beer and cider in the United Kingdom may be sold only in third-pints, half-pints and multiples of half a pint, and the glass itself must carry a verification mark certifying that it holds the stated measure. Publicans can be prosecuted for short measure, so the pint is one of the few units in daily life whose accuracy is actively policed.

Milk keeps the second foothold. Milk sold in returnable glass bottles may still be measured in pints, which is why doorstep deliveries are ordered by the pint while supermarket cartons carry litres. That split is a useful illustration of how metrication proceeded in Britain: it changed the shops and left the traditions alone.

The American pint is a different quantity and the difference is large. A United States liquid pint is 473 millilitres against the imperial 568, so a British pint is about a fifth bigger, and a traveller who orders a pint in New York receives noticeably less than one in Dublin. The American mnemonic that a pint's a pound the world around works only for the American pint; a British pint of water weighs a pound and a quarter.

That weight relationship was once the definition. The imperial system was built so that a gallon of water weighed ten pounds, which makes a pint weigh exactly a pound and a quarter, and the older British rhyme says so directly. Since 1985 the pint has been defined from the metric gallon instead, but the relationship still holds closely enough to be a useful check.

Below the pint the imperial chain runs to the gill at a quarter of a pint and the fluid ounce at a twentieth. Above it come the quart and the gallon. None of these steps is decimal, which is the reason the pint is now the only survivor: it is the one member of the chain that people handle directly, and the rest of the arithmetic has quietly moved to litres.

One imperial pint equals 568.26125 millilitres, 20 imperial fluid ounces, 0.125 imperial gallons, or about 1.201 US liquid pints.

Information about the US Dry pint (pt)

The United States dry pint is a unit of volume equal to 550.610471 millilitres, or 33.6 cubic inches. Its symbol is pt. It belongs to a separate American measuring system used for produce and grain rather than for liquids, and it is about sixteen per cent larger than the United States liquid pint of 473 millilitres.

Two parallel chains exist because two kinds of goods were once measured differently. Liquids descend from the wine gallon of 231 cubic inches, while dry goods descend from the Winchester bushel of 2150.42 cubic inches, a corn measure standardised in medieval England. Dividing the bushel by four gives a peck, by thirty-two a dry quart, and by sixty-four a dry pint, and none of those figures has any relation to the liquid chain.

Berries are where the unit is still met. Blueberries, raspberries and strawberries are sold in American markets in pint and quart baskets, and the basket is a dry measure. A pint of blueberries is therefore 551 millilitres of fruit, not 473, and a shopper comparing that basket with a pint of cream is comparing two different quantities under one name.

Nothing on a label resolves the ambiguity. Both are written pt, both are called a pint, and the word gives no clue as to which chain is meant. In practice the contents decide: if it pours, it is liquid measure, and if it is heaped, it is dry. That rule is reliable but it is nowhere written down, which is why converted American recipes so often disagree with one another.

Its existence is a survival from selling by bulk. Before cheap accurate scales, grain, apples, potatoes and shellfish were sold by filling a stamped measure and levelling it off, and the whole dry chain from bushel down to pint served that trade. Almost all of it has now been replaced by weight, and United States produce regulations increasingly specify pounds instead.

For conversion, the safest approach is to abandon the name entirely. A dry pint is 551 millilitres, a dry quart 1101, a peck 8.81 litres and a bushel 35.24. Writing the metric figure removes an ambiguity that the English word carries and cannot shed.

One United States dry pint equals 550.61 millilitres, 33.6 cubic inches, half a US dry quart, or about 1.164 US liquid pints.