Conversion from 2 Kibioctets to Mebioctets

Information about the Kibioctet (Kio)

The kibioctet is a unit of digital information equal to 1,024 octets, and therefore to 8,192 bits. Its symbol is Kio. It is the binary counterpart of the kilooctet, and although the two differ by only 2.4 per cent, this is the unit in which a great deal of a computer's internal organisation is actually measured.

The most important example is the memory page. Processors do not manage memory octet by octet but in fixed-size blocks, and on almost every architecture in common use that block is 4 kibioctets. Every allocation a program makes is rounded up to a multiple of that, every entry in the page tables describes one of them, and the performance of a program often depends on how well its access pattern fits that four-kibioctet grid.

Disc sectors tell a similar story. Hard drives used 512-octet sectors for decades, and modern drives use 4 kibioctets, matching the memory page so that a page can be read or written in a single operation. Filesystems then allocate space in blocks that are themselves powers of two, usually 4 kibioctets, which is why a one-octet file consumes four kibioctets of disc.

Network protocols use the unit too. Buffer sizes, window sizes and the maximum size of many protocol structures are powers of two, and the 64-kibioctet limit appears repeatedly: it is the largest value a 16-bit length field can express, and it therefore caps the size of a UDP datagram, an IP packet and several older file formats.

That is the general pattern: wherever a limit comes from the width of a binary field, the limit is a power of two, and the honest way to write it is with a binary prefix. Writing 64 KB for the datagram limit is not wrong by much, but writing 64 KiB is exactly right and says where the number came from.

In everyday use the difference is invisible. A 200-kilooctet file and a 200-kibioctet file are 4.8 kibioctets apart, which nobody notices. The value of the distinction is that it makes the arithmetic behind a figure legible, which matters far more as the numbers grow.

One kibioctet equals 1,024 octets, 8,192 bits, 8 kibibits, or 1.024 kilooctets.

Information about the Mebioctet (Mio)

The mebioctet is a unit of digital information equal to 1,048,576 octets, which is 1,024 kibioctets. Its symbol is Mio. It is the binary counterpart of the megaoctet, and the two differ by 4.9 per cent — the point at which a careful writer starts distinguishing them.

The unit's most visible home is the processor cache. The fast memory built into a processor to hold recently used data is sized in binary, and modern chips carry caches measured in mebioctets: a few hundred kibioctets at the second level and tens of mebioctets at the third. Those figures are exact powers of two because the cache is addressed by dividing an address into fixed bit fields.

Block sizes and buffers follow the same logic. Filesystems allocate in blocks, database engines read in pages, compression tools work in windows, and all of these are powers of two, most often a few mebioctets. A tool that offers a buffer of 16 megaoctets almost always means 16 mebioctets, because the underlying allocation is a shift rather than a multiplication.

The distinction has become visible to ordinary users through the discrepancy between what a download claims and what a file manager reports. A file described as 100 megaoctets on a website is often 100 mebioctets on disc, or the reverse, and the resulting 4.9 per cent difference is enough to make a progress bar look wrong without anything actually being wrong.

For scale, a mebioctet holds a million characters of unaccented text — roughly a long novel, or five hundred pages. It is also a single photograph from a modest camera, or eight seconds of high-definition video. The same unit therefore describes both a very large amount of text and a very small amount of video, which says a good deal about the relative cost of representing the two.

The IEC notation Mio is used in technical documentation, in the Linux kernel, in filesystem tools and in standards. It remains rare in consumer software, where MB is written for both quantities. When a figure matters, the safest habit is to compute in octets and convert once at the end.

One mebioctet equals 1,048,576 octets, 1,024 kibioctets, 8 mebibits, or about 1.049 megaoctets.