| Decameters (dam) | Millimeters (mm) |
|---|---|
| 1 Decameter | 10000 mm |
| 2 Decameters | 20000 mm |
| 3 Decameters | 30000 mm |
| 4 Decameters | 40000 mm |
| 5 Decameters | 50000 mm |
| 10 Decameters | 100000 mm |
| 20 Decameters | 200000 mm |
| 25 Decameters | 250000 mm |
| 50 Decameters | 500000 mm |
| 100 Decameters | 1000000 mm |
| Reference | Decameters (dam) | Millimeters (mm) |
|---|---|---|
| A sheet of A4 paper (long side) | 0.0297 dam | 297 mm |
| Average adult human height | 0.17 dam | 1700 mm |
| A football pitch (length) | 10.5 dam | 105000 mm |
| A marathon | 4219.5 dam | 42195000 mm |
| Height of Mount Everest | 884.9 dam | 8849000 mm |
The decametre is ten metres, written dam. It is a valid SI unit formed with the prefix deca, but like the decimetre it is rarely used. The prefix deca is the only SI multiplier whose symbol is two letters, which makes it slightly awkward to write and may have contributed to its neglect.
Spelling varies. Decametre is the international form; dekameter appears in some American texts, and the symbol dkm is occasionally seen in older material, though dam is the form recognised by the BIPM. The similarity between dam and the abbreviation for decimetre has caused confusion, and some standards bodies discourage the unit for that reason alone.
Where it does appear, it is usually in surveying, forestry and agronomy. Field dimensions, plot spacing and tree heights sit conveniently in the range of a few decametres. Some European cadastral records use the unit. It also occurs in specifications for cable and hose supplied in ten-metre lengths.
The derived area unit is more familiar than the length unit. A square decametre is 100 square metres, which is exactly one are. The are is itself little used, but its hundredfold multiple, the hectare, is the standard measure of land area across most of the world. A hectare is 100 ares, or 10,000 square metres, and can equally be described as a square hectometre.
In practice most people express ten metres simply as ten metres, or as 0.01 kilometres when working at larger scales. The decametre is best understood as a formally correct unit that everyday usage has passed over.
The unit does appear in one everyday context without being named. Swimming pool lane lengths, running track segments and the spacing of street lighting are frequently set in multiples of ten metres. Planning documents that lay out plot frontages or building setbacks often work to the same grid. The quantity is useful; it is only the word that has fallen out of use.
Its square has fared better than the length itself. The are, a hundred square metres, is the square decametre under another name, and although the are is now rare its hundredfold the hectare governs land measurement across most of the world. The same pattern shows in the decare of a thousand square metres, which is the standard unit of farmland in Turkey, Greece, Norway and parts of the Balkans and is simply ten ares. So the decametre survives chiefly by inheritance: nobody quotes a field boundary in decametres, but a great deal of the world's land is bought and sold in units built from it.
One decametre equals 10 metres, 1000 centimetres, or 0.01 kilometres. It is about 32.8084 feet.
The millimetre is one thousandth of a metre, written mm. It is the smallest division marked on most rulers and tape measures, which makes it the practical floor of everyday measurement in countries using the metric system.
Technical drawing has settled on the millimetre almost universally. Mechanical engineering drawings state dimensions in millimetres by default, usually without writing the unit at all, because the convention is understood. This avoids the decimal points that centimetres would introduce and the large numbers that micrometres would require. A component 45.5 mm long is easier to read and harder to misinterpret than one 4.55 cm or 45500 µm long.
Meteorology uses the millimetre for rainfall. A reading of 25 mm means that rain would stand 25 millimetres deep on a flat surface that did not drain, which corresponds to 25 litres per square metre. Snowfall is usually reported as depth in centimetres and separately as liquid water equivalent in millimetres.
Medicine relies on the unit for tumour dimensions, wound measurement and the size of anatomical structures on imaging. Ophthalmic prescriptions specify pupillary distance in millimetres. Blood pressure retains the older unit of millimetres of mercury, a pressure measurement whose name preserves the height of a mercury column.
Paper, sheet metal and glass are specified by thickness in millimetres. A standard sheet of office paper is about 0.1 mm thick. Domestic window glass is commonly 4 mm. Firearm and ammunition calibres are frequently given in millimetres, as in 9 mm.
Fastener sizes follow the unit closely. Metric bolts and screws are designated by their nominal diameter in millimetres, so an M8 bolt has an eight-millimetre thread. Spanner and socket sizes are marked the same way, measuring across the flats of the fastener head. This is why a metric toolkit contains an unbroken run of sizes rather than the fractional inch steps of an imperial set.
Medicine measures pressure with it as well as distance. Blood pressure is reported in millimetres of mercury, the height of a mercury column the pressure would support, so a healthy reading of 120 over 80 refers to two lengths rather than to any force directly. The convention dates from the mercury manometer and has survived every instrument that replaced it, because the numbers are familiar to every clinician alive. The same unit measures intraocular pressure in the eye, central venous pressure and the partial pressures of gases in blood, and it appears in vacuum work as the torr, which is one millimetre of mercury under another name.
One millimetre equals 1000 micrometres, 0.1 centimetres, or 0.001 metres. It is roughly 0.03937 inches, so 25.4 millimetres make exactly one inch.