| Centimeters (cm) | Millimeters (mm) |
|---|---|
| 1 Centimeter | 10 mm |
| 2 Centimeters | 20 mm |
| 3 Centimeters | 30 mm |
| 4 Centimeters | 40 mm |
| 5 Centimeters | 50 mm |
| 10 Centimeters | 100 mm |
| 20 Centimeters | 200 mm |
| 25 Centimeters | 250 mm |
| 50 Centimeters | 500 mm |
| 100 Centimeters | 1000 mm |
| Reference | Centimeters (cm) | Millimeters (mm) |
|---|---|---|
| A sheet of A4 paper (long side) | 29.7 cm | 297 mm |
| Average adult human height | 170 cm | 1700 mm |
| A football pitch (length) | 10500 cm | 105000 mm |
| A marathon | 4219500 cm | 42195000 mm |
| Height of Mount Everest | 884900 cm | 8849000 mm |
The centimetre is one hundredth of a metre, written cm. Among the metric subdivisions it is the one people reach for most readily in daily life, occupying the range where objects are small enough to hold but too large to measure comfortably in millimetres.
Body measurement is its most common application. Height, waist, chest and inside leg are recorded in centimetres across most of the world, and clothing is sized accordingly. Paediatric growth charts plot height and head circumference in centimetres against age. Rainfall over long periods, snow depth and the dimensions of furniture and luggage are all reported the same way.
The unit had a formal role in science for nearly a century. The centimetre-gram-second system, adopted by the British Association for the Advancement of Science in 1874, took the centimetre as its base unit of length. CGS units such as the erg, the dyne and the gauss were standard in physics until the metre-kilogram-second system displaced them, and SI formally superseded CGS in 1960. Some CGS units persist in astronomy and in parts of electromagnetism.
Volume follows naturally. A cubic centimetre, written cm3 or cc, equals exactly one millilitre. Engine displacement is often quoted in cubic centimetres, particularly for motorcycles, and medical syringes are marked the same way.
Despite its usefulness, the centimetre sits awkwardly in engineering practice. Technical drawings prefer millimetres precisely to avoid mixing units that differ by a factor of ten, since a misplaced decimal point between the two is a plausible and expensive error.
Map scales often make the unit explicit. A 1:25,000 map means one centimetre on the paper represents 25,000 centimetres on the ground, or 250 metres, so four centimetres cover a kilometre. Walkers and orienteers use this relationship constantly, and it is one of the clearer illustrations of why a decimal system is convenient: converting between the two scales requires only moving a decimal point.
Two well-known wavelengths fall in this range and are named by it. Neutral hydrogen radiates at 21 centimetres, a line predicted in 1944 and detected seven years later, and because hydrogen fills the galaxy that single wavelength has mapped the spiral arms of the Milky Way and the rotation curves that first indicated dark matter. Domestic microwave ovens work at 12.2 centimetres, chosen from a band set aside for industrial and medical use rather than for any special resonance with water. In both cases the centimetre is the natural unit because the wave is the size of a hand.
One centimetre equals 10 millimetres or 0.01 metres, and is very close to 0.3937 inches.
The millimetre is one thousandth of a metre, written mm. It is the smallest division marked on most rulers and tape measures, which makes it the practical floor of everyday measurement in countries using the metric system.
Technical drawing has settled on the millimetre almost universally. Mechanical engineering drawings state dimensions in millimetres by default, usually without writing the unit at all, because the convention is understood. This avoids the decimal points that centimetres would introduce and the large numbers that micrometres would require. A component 45.5 mm long is easier to read and harder to misinterpret than one 4.55 cm or 45500 µm long.
Meteorology uses the millimetre for rainfall. A reading of 25 mm means that rain would stand 25 millimetres deep on a flat surface that did not drain, which corresponds to 25 litres per square metre. Snowfall is usually reported as depth in centimetres and separately as liquid water equivalent in millimetres.
Medicine relies on the unit for tumour dimensions, wound measurement and the size of anatomical structures on imaging. Ophthalmic prescriptions specify pupillary distance in millimetres. Blood pressure retains the older unit of millimetres of mercury, a pressure measurement whose name preserves the height of a mercury column.
Paper, sheet metal and glass are specified by thickness in millimetres. A standard sheet of office paper is about 0.1 mm thick. Domestic window glass is commonly 4 mm. Firearm and ammunition calibres are frequently given in millimetres, as in 9 mm.
Fastener sizes follow the unit closely. Metric bolts and screws are designated by their nominal diameter in millimetres, so an M8 bolt has an eight-millimetre thread. Spanner and socket sizes are marked the same way, measuring across the flats of the fastener head. This is why a metric toolkit contains an unbroken run of sizes rather than the fractional inch steps of an imperial set.
Medicine measures pressure with it as well as distance. Blood pressure is reported in millimetres of mercury, the height of a mercury column the pressure would support, so a healthy reading of 120 over 80 refers to two lengths rather than to any force directly. The convention dates from the mercury manometer and has survived every instrument that replaced it, because the numbers are familiar to every clinician alive. The same unit measures intraocular pressure in the eye, central venous pressure and the partial pressures of gases in blood, and it appears in vacuum work as the torr, which is one millimetre of mercury under another name.
One millimetre equals 1000 micrometres, 0.1 centimetres, or 0.001 metres. It is roughly 0.03937 inches, so 25.4 millimetres make exactly one inch.