Conversion from 100 Square decimeters to Hectares

Information about the Square decimeter (dm²)

The square decimetre is a unit of area equal to one hundredth of a square metre, or one hundred square centimetres. It is written dm². It is the area of a square ten centimetres on a side, which is about the size of a palm or a drinks coaster, and it sits in the gap between the square centimetre of small objects and the square metre of rooms.

The decimetre owes its survival to volume rather than to area. A cubic decimetre is exactly one litre, which quietly builds the prefix into the most used volume unit in the world, and a square decimetre is the cross-section of that litre cube. Anyone who can picture a litre carton already knows what a square decimetre looks like: it is the face of the box.

Its one substantial commercial home is the leather trade. Hides are irregular, so they are measured by area rather than by length, and European tanneries, shoe factories and leather goods makers buy and sell in square decimetres. A whole cowhide runs to something like 200 to 250 square decimetres, a lambskin to about 50, and prices, cutting yields and waste allowances are all calculated on that basis. British and American buyers use square feet for the same purpose, and one square foot is 9.29 square decimetres.

Everyday objects land conveniently on it. A sheet of A4 paper is 6.24 square decimetres, a standard floor tile of thirty centimetres is nine, and a large postage stamp is a small fraction of one. Schools use the unit for exactly this reason: it lets a class measure real objects without either very large or very small numbers, and it makes the squaring rule visible, since ten centimetres on a side gives a hundred square centimetres.

Outside those uses it is rare, and for the usual reason. Engineering standardised on prefixes that step by a factor of a thousand, so square millimetres, square metres and square kilometres cover everything in practice. Ten square decimetres is more naturally written as 0.1 square metres, which sorts correctly beside every other figure in a specification.

Converting is straightforward once the squaring is kept in mind. Multiply by a hundred for square centimetres, divide by a hundred for square metres, and remember that the factor between neighbouring units is the square of the factor between the lengths, not the factor itself.

One square decimetre equals 100 square centimetres, 0.01 square metres, or about 15.5 square inches.

Information about the Hectare (ha)

The hectare is a unit of area equal to 10,000 square metres, written ha. It is a square one hundred metres on a side. It is not strictly an SI unit, but the International Bureau of Weights and Measures accepts it for use with the SI in the one field where it is indispensable: the measurement of land.

It descends from the are, a unit of one hundred square metres introduced in revolutionary France in 1795. The are proved too small for fields and the square kilometre too large, so the hundredfold multiple settled into the gap and outlived its parent entirely. Today almost nobody writes ares, while hectares appear on title deeds, farm subsidies and environmental reports across most of the world.

Agriculture is built on it. Crop yields are quoted in tonnes per hectare, and the figures carry a great deal of information in very little space: wheat in north-western Europe runs to about eight tonnes per hectare, against a world average nearer three. Wine appellations cap production in hectolitres per hectare, and European farm support has been paid per hectare rather than per tonne since the 1990s, which changed what farmers grew as much as any agronomic advance.

Environmental accounting uses the same unit. Deforestation, wetland loss, protected area and reforestation targets are all reported in hectares, because the quantity is large enough to describe a forest and small enough to describe a field. Urban planning uses it inverted, as dwellings per hectare, which is the standard way of comparing the density of one development with another.

For a sense of scale, an association football pitch of the usual size covers about 0.7 hectares, so a hectare is roughly a pitch and a half. A hectare of productive farmland feeds a handful of people on a mixed diet, and a hectare of dense city holds several hundred residents. Traditional Japanese and Korean land measures happen to land close by: one chō and one jeongbo are both about 0.99 hectares.

The imperial competitor is the acre, and the two do not convert cleanly: one hectare is 2.471 acres, and one acre is 0.4047 hectares. Where both systems are in use, as in Ireland, parts of Canada and much of South Asia, land is often quoted in both, and the conversion factor is one of the few worth committing to memory.

One hectare equals 10,000 square metres, about 2.471 acres, 0.01 square kilometres, or about 107,639 square feet.