| Millimeters (mm) | Micrometers (μm) |
|---|---|
| 1 Millimeter | 1000 μm |
| 2 Millimeters | 2000 μm |
| 3 Millimeters | 3000 μm |
| 4 Millimeters | 4000 μm |
| 5 Millimeters | 5000 μm |
| 10 Millimeters | 10000 μm |
| 20 Millimeters | 20000 μm |
| 25 Millimeters | 25000 μm |
| 50 Millimeters | 50000 μm |
| 100 Millimeters | 100000 μm |
| Reference | Millimeters (mm) | Micrometers (μm) |
|---|---|---|
| A sheet of A4 paper (long side) | 297 mm | 297000 μm |
| Average adult human height | 1700 mm | 1700000 μm |
| A football pitch (length) | 105000 mm | 105000000 μm |
| A marathon | 42195000 mm | 4.2195 × 1010 μm |
| Height of Mount Everest | 8849000 mm | 8.849 × 109 μm |
The millimetre is one thousandth of a metre, written mm. It is the smallest division marked on most rulers and tape measures, which makes it the practical floor of everyday measurement in countries using the metric system.
Technical drawing has settled on the millimetre almost universally. Mechanical engineering drawings state dimensions in millimetres by default, usually without writing the unit at all, because the convention is understood. This avoids the decimal points that centimetres would introduce and the large numbers that micrometres would require. A component 45.5 mm long is easier to read and harder to misinterpret than one 4.55 cm or 45500 µm long.
Meteorology uses the millimetre for rainfall. A reading of 25 mm means that rain would stand 25 millimetres deep on a flat surface that did not drain, which corresponds to 25 litres per square metre. Snowfall is usually reported as depth in centimetres and separately as liquid water equivalent in millimetres.
Medicine relies on the unit for tumour dimensions, wound measurement and the size of anatomical structures on imaging. Ophthalmic prescriptions specify pupillary distance in millimetres. Blood pressure retains the older unit of millimetres of mercury, a pressure measurement whose name preserves the height of a mercury column.
Paper, sheet metal and glass are specified by thickness in millimetres. A standard sheet of office paper is about 0.1 mm thick. Domestic window glass is commonly 4 mm. Firearm and ammunition calibres are frequently given in millimetres, as in 9 mm.
Fastener sizes follow the unit closely. Metric bolts and screws are designated by their nominal diameter in millimetres, so an M8 bolt has an eight-millimetre thread. Spanner and socket sizes are marked the same way, measuring across the flats of the fastener head. This is why a metric toolkit contains an unbroken run of sizes rather than the fractional inch steps of an imperial set.
Medicine measures pressure with it as well as distance. Blood pressure is reported in millimetres of mercury, the height of a mercury column the pressure would support, so a healthy reading of 120 over 80 refers to two lengths rather than to any force directly. The convention dates from the mercury manometer and has survived every instrument that replaced it, because the numbers are familiar to every clinician alive. The same unit measures intraocular pressure in the eye, central venous pressure and the partial pressures of gases in blood, and it appears in vacuum work as the torr, which is one millimetre of mercury under another name.
One millimetre equals 1000 micrometres, 0.1 centimetres, or 0.001 metres. It is roughly 0.03937 inches, so 25.4 millimetres make exactly one inch.
The micrometre is one millionth of a metre, written µm using the Greek letter mu. It is also widely called the micron, a name the General Conference on Weights and Measures formally abolished in 1967 but which remains in everyday use across manufacturing and materials science.
The unit covers the scale of individual cells and fine particles. A human red blood cell is about 7 µm across. Bacteria typically measure 1 to 5 µm. Human hair ranges from roughly 17 to 180 µm in diameter, which is why hair is visible while cells are not. The limit of unaided human vision falls near 50 µm.
Air quality regulation relies on the micrometre. PM10 and PM2.5 refer to particulate matter smaller than 10 µm and 2.5 µm respectively. The distinction matters medically: larger particles are filtered by the nose and throat, while PM2.5 penetrates deep into the lungs and can enter the bloodstream.
Precision engineering works in the same range. Machining tolerances are commonly specified in micrometres, and surface roughness is quoted in the same unit. Bearing clearances, paint film thickness and the flatness of optical components are all measured this way. The measuring instrument called a micrometer, or micrometer screw gauge, is named for the precision it offers rather than for a fixed relationship to the unit.
Wavelengths in the infrared are usually given in micrometres rather than nanometres. Thermal imaging cameras typically operate between 8 and 14 µm, the band where objects at everyday temperatures emit most strongly.
Filtration is specified almost entirely in this unit. Water filters are rated by the smallest particle they retain, commonly between 0.2 and 50 µm, and a 0.2 µm filter is fine enough to remove most bacteria. Surgical masks and respirators are tested against particles in the same range. The N95 designation refers to a filter that captures at least 95 per cent of airborne particles at the hardest size to trap, around 0.3 µm.
Its older name still causes confusion. Until 1967 the unit was officially called the micron and written with a bare Greek mu, and the word remains common in industry even though the conference of that year removed it from the SI. Semiconductor manufacturing carried the name for a generation: chips were described by their process node in microns, falling from ten in the 1970s to below one by 1990, at which point the industry switched to nanometres and kept going. The modern node names no longer correspond to any physical dimension on the chip, but the earlier ones did, and they were quoted in exactly this unit.
One micrometre equals 1000 nanometres, 0.001 millimetres, or 10-6 metres.