| Leagues (lea) | Millimeters (mm) |
|---|---|
| 1 League | 4828032 mm |
| 2 Leagues | 9656064 mm |
| 3 Leagues | 14484096 mm |
| 4 Leagues | 19312128 mm |
| 5 Leagues | 24140160 mm |
| 10 Leagues | 48280320 mm |
| 20 Leagues | 96560640 mm |
| 25 Leagues | 120700800 mm |
| 50 Leagues | 241401600 mm |
| 100 Leagues | 482803200 mm |
| Reference | Leagues (lea) | Millimeters (mm) |
|---|---|---|
| A sheet of A4 paper (long side) | 0.0000615157 lea | 297 mm |
| Average adult human height | 0.00035211 lea | 1700 mm |
| A football pitch (length) | 0.021748 lea | 105000 mm |
| A marathon | 8.73959 lea | 42195000 mm |
| Height of Mount Everest | 1.83284 lea | 8849000 mm |
The league is a unit of length equal to three miles, 24 furlongs, or exactly 4828.032 metres. It is obsolete in every practical sense, surviving mainly in literature and in historical documents.
The unit originated as a measure of how far a person could walk in an hour, which explains both its rough magnitude and its variability. Ancient and medieval leagues differed widely between regions. The Roman leuga was about 2.2 kilometres. French, Spanish and Portuguese leagues each had their own values, and the Spanish legua used in colonial land grants in the Americas differed again, complicating the interpretation of old property records in Texas and the American southwest.
English usage settled on three miles, a figure that was never especially precise in practice because it depended on the mile in force at the time. Since the mile itself was fixed at 5280 feet in 1593, the league inherited that definition, giving the modern value of 4828.032 metres.
Its cultural persistence far exceeds its practical use. Jules Verne's Twenty Thousand Leagues Under the Seas measures a journey rather than a depth, a distinction frequently lost in casual reference: twenty thousand leagues is roughly 96,000 kilometres, more than twice the circumference of the Earth and vastly greater than any ocean depth. Seven-league boots appear in French fairy tales as a device for covering ground in single strides. Tennyson's Charge of the Light Brigade opens with half a league onward.
The unit was formally abolished for trade in the United Kingdom long ago and has no legal standing. It appears occasionally in nautical contexts, where the marine league of three nautical miles is a separate and slightly longer unit.
Because the unit is so variable across languages and centuries, translations of older works can mislead badly. A distance given in leagues in a Spanish colonial document, a French medieval chronicle and an English statute may differ by a factor of two, and historians working with such sources generally convert to modern units and state which league they have assumed.
One league equals 3 miles, 4828.032 metres, or 4.828032 kilometres. A brisk hour's walk covers rather less than one.
The millimetre is one thousandth of a metre, written mm. It is the smallest division marked on most rulers and tape measures, which makes it the practical floor of everyday measurement in countries using the metric system.
Technical drawing has settled on the millimetre almost universally. Mechanical engineering drawings state dimensions in millimetres by default, usually without writing the unit at all, because the convention is understood. This avoids the decimal points that centimetres would introduce and the large numbers that micrometres would require. A component 45.5 mm long is easier to read and harder to misinterpret than one 4.55 cm or 45500 µm long.
Meteorology uses the millimetre for rainfall. A reading of 25 mm means that rain would stand 25 millimetres deep on a flat surface that did not drain, which corresponds to 25 litres per square metre. Snowfall is usually reported as depth in centimetres and separately as liquid water equivalent in millimetres.
Medicine relies on the unit for tumour dimensions, wound measurement and the size of anatomical structures on imaging. Ophthalmic prescriptions specify pupillary distance in millimetres. Blood pressure retains the older unit of millimetres of mercury, a pressure measurement whose name preserves the height of a mercury column.
Paper, sheet metal and glass are specified by thickness in millimetres. A standard sheet of office paper is about 0.1 mm thick. Domestic window glass is commonly 4 mm. Firearm and ammunition calibres are frequently given in millimetres, as in 9 mm.
Fastener sizes follow the unit closely. Metric bolts and screws are designated by their nominal diameter in millimetres, so an M8 bolt has an eight-millimetre thread. Spanner and socket sizes are marked the same way, measuring across the flats of the fastener head. This is why a metric toolkit contains an unbroken run of sizes rather than the fractional inch steps of an imperial set.
Medicine measures pressure with it as well as distance. Blood pressure is reported in millimetres of mercury, the height of a mercury column the pressure would support, so a healthy reading of 120 over 80 refers to two lengths rather than to any force directly. The convention dates from the mercury manometer and has survived every instrument that replaced it, because the numbers are familiar to every clinician alive. The same unit measures intraocular pressure in the eye, central venous pressure and the partial pressures of gases in blood, and it appears in vacuum work as the torr, which is one millimetre of mercury under another name.
One millimetre equals 1000 micrometres, 0.1 centimetres, or 0.001 metres. It is roughly 0.03937 inches, so 25.4 millimetres make exactly one inch.