Conversion from 100 Deciseconds to Seconds

=

Invert

Formula to convert Deciseconds (ds) to Seconds (s)

More information

Deciseconds to Seconds conversion table

Time reference points

ReferenceDeciseconds (ds)Seconds (s)
A blink of an eye1 ds0.1 s
One heartbeat at rest8.3 ds0.83 s
Half of a football match27000 ds2700 s
A full day864000 ds86400 s

Try our other unit converters

LengthMassTemperatureEnergyVolumeSpeedTimeDataPressureFrequencyData-transfer rateVolumetric flow rateAngleArea

Information about the Decisecond (ds)

The decisecond is a unit of time equal to one tenth of a second. Its symbol is ds. Like the centisecond it is a name that is almost never used, while the quantity it names turns up constantly under other descriptions.

A tenth of a second is roughly the shortest interval a person can consciously register as a duration rather than an instant. Voluntary reaction to a sound takes about one and a half deciseconds, and to a light rather longer. The blink of an eye lasts between one and four deciseconds. These figures set the boundary between what feels immediate and what feels delayed, and interface designers work to keep responses inside it.

Sport uses the quantity where the hundredth would be false precision. Long-distance running, road cycling, cross-country skiing and marathon swimming publish results to the tenth, because over an hour or more the differences between competitors are large and the measurement uncertainties from course length and timing points make finer figures unjustifiable. Field events measured in distance rather than time follow a parallel logic with the centimetre.

Speech occupies the same scale. An average spoken syllable lasts around two deciseconds, and the pause that listeners hear as the end of a sentence is roughly five. Speech recognition systems segment audio into frames of about one tenth to one quarter of a decisecond, and the natural rhythm they are trying to capture sits an order of magnitude above that.

Engineering meets the tenth of a second in relay timing, in the response of mechanical safety interlocks, and in the specification of how quickly a residual current device must disconnect a faulty circuit. Music sits here too: a metronome at one hundred and twenty beats per minute puts five deciseconds between beats.

The deci prefix is among the least used in the SI. It survives in the decibel and the decilitre and almost nowhere else, so a tenth of a second is nearly always written and spoken as exactly that.

Photography meets the same interval from the other side. A shutter open for a tenth of a second gathers plenty of light but records any camera shake as blur, which is why the old rule was never to hand-hold a lens slower than the reciprocal of its focal length. Cinema and video sit just below: at twenty-four frames a second a tenth of a second is a little over two frames, and at fifty it is five, so a tenth is the shortest event an ordinary recording can show as motion rather than as a single frame. Instrument logging often samples at this rate for the same reason, fast enough to catch a change and slow enough to keep the file small.

One decisecond equals 0.1 seconds, 10 centiseconds, or 100 milliseconds.


Information about the Second (s)

The second is the base unit of time in the International System of Units. Its symbol is s. It is defined by fixing the frequency of the caesium-133 hyperfine transition at exactly 9,192,631,770 cycles per second, so a second is the duration of that many oscillations.

The name records a division that no longer exists in practice. Medieval astronomers divided the hour into sixty minutae primae, first small parts, and each of those into sixty minutae secundae, second small parts. English kept the first as minute and the second as second, leaving the ordinal in the name of a unit almost nobody thinks of as ordinal.

For most of history the second was defined from the rotation of the Earth, as one 86,400th of a mean solar day. That definition failed once clocks became better than the planet: the Earth's rotation is irregular, slowing over centuries from tidal friction and wobbling on shorter timescales. The atomic definition adopted in 1967 severed the link, which is why leap seconds are occasionally inserted to keep civil time aligned with the sun.

Every other time unit is now built on it, and the second underpins most of the rest of the SI as well. The metre is defined through the speed of light in metres per second, the kilogram through the Planck constant which carries a second in its units, and the ampere through the elementary charge per second. Caesium fountain clocks realise the unit to a few parts in ten to the sixteenth, and optical clocks now do better still.

Because atomic clocks keep better time than the planet does, the two have to be reconciled. The Earth's rotation is slowing irregularly, so a day is now a millisecond or two longer than 86,400 atomic seconds, and the difference accumulates. Since 1972 the answer has been the leap second: an extra second inserted at the end of a June or December, announced months in advance, which has happened twenty-seven times. Computer systems handle the repeated timestamp badly enough that outages have been traced to it, and in 2022 the world's metrology bodies voted to abandon the practice by 2035, letting civil time drift from solar time instead.

One second equals 1000 milliseconds, one sixtieth of a minute, or about 0.000277778 hours.