| Reference | Yards (yd) | Decimeters (dm) |
|---|---|---|
| A sheet of A4 paper (long side) | 0.324803 yd | 2.97 dm |
| Average adult human height | 1.85914 yd | 17 dm |
| A football pitch (length) | 114.829 yd | 1050 dm |
| A marathon | 46145 yd | 421950 dm |
| Height of Mount Everest | 9677.38 yd | 88490 dm |
The yard is a unit of length equal to exactly 0.9144 metres, or three feet. The symbol is yd. It is the base unit of the imperial and United States customary length systems, with the foot and inch defined as fractions of it.
That relationship is the reverse of what most people assume. Since 1959 the yard has been defined against the metre, and the foot and inch follow from it, so every imperial length unit is ultimately derived from an SI definition. The International Yard and Pound Agreement fixed the value at 0.9144 metres exactly, reconciling small differences between the American and British yards that had persisted for decades.
The origin of the name is uncertain. Old English gierd meant a rod or measuring stick. The frequently repeated story that Henry I defined the yard as the distance from his nose to his outstretched thumb is not supported by contemporary evidence, though it has proved durable. A physical standard yard bar was maintained in London from 1760, and its destruction in the 1834 Palace of Westminster fire forced a lengthy reconstruction from surviving copies.
Sport keeps the unit prominent. An American football field is 100 yards between goal lines, and the game's vocabulary is built around yardage. Golf course distances are marked in yards in Britain and the United States. Cricket sets the distance between wickets at 22 yards, a figure inherited from the surveyor's chain.
Fabric and carpet are sold by the yard in the United States, and textile widths are quoted in inches alongside. Landscaping materials such as topsoil and gravel are sold by the cubic yard, which is 27 cubic feet or about 0.7646 cubic metres.
Its cube runs the construction trade in North America. Concrete is ordered, delivered and billed by the cubic yard, about 0.765 cubic metres, and a standard mixer truck carries eight or nine of them; excavation, gravel, topsoil and demolition waste are all quoted the same way. Golf keeps the linear unit just as firmly, with every hole on every scorecard measured in yards and every club sold on the distance it carries, so a player who reads a shot as a hundred and fifty yards is using a measurement the rest of the game's arithmetic depends on. Between them the two uses make the yard unlikely to disappear.
One yard equals 3 feet, 36 inches, or 0.9144 metres exactly. It is a little shorter than a metre, by about 8.4 centimetres.
The decimetre is one tenth of a metre, written dm. It is a legitimate SI-derived unit formed with the prefix deci, but it is among the least used members of the metric ladder. Most people move directly from centimetres to metres and skip the intermediate step entirely.
The reason is practical rather than technical. A length of 3 dm is more naturally expressed as 30 cm or 0.3 m, and neither alternative requires the reader to pause. Units survive when they answer a question no neighbouring unit answers as well, and the decimetre rarely does.
One derived form is a striking exception. The cubic decimetre, dm3, is exactly one litre, because a cube measuring 10 cm on each side holds precisely that volume. This relationship is the foundation of the metric volume system and was deliberate: the litre was defined in 1795 as the volume of a cubic decimetre. The unit therefore appears constantly in chemistry, where concentration is expressed in moles per cubic decimetre, written mol/dm3. School and university chemistry courses use this notation routinely even though the same quantity could be written as moles per litre.
The square decimetre sees occasional use in specifying small areas, particularly in materials testing and in some European technical standards for coatings and surface treatment.
Outside these niches the decimetre appears mainly in teaching, where the full sequence of prefixes is demonstrated, and in tables of unit conversions. Some countries have used it historically for shoe sizing and for textile measurement.
Aquarium and tank capacities show the same relationship at work. A tank measuring five by three by four decimetres holds sixty cubic decimetres, which is sixty litres, and the arithmetic can be done without conversion factors. This is the practical advantage the metric system was designed to deliver, and the decimetre is the length at which volume in litres and length in whole units line up most neatly.
Scandinavia is the exception to its general neglect. Swedish, Norwegian and Danish speakers use the decimetre in ordinary conversation, giving the size of a fish, a shelf or a snowfall in decimetres where a French or German speaker would say tens of centimetres. Schools there teach it alongside the centimetre and the metre rather than skipping it, and rulers are marked accordingly. The habit is a reminder that which prefixes feel natural is a matter of custom rather than logic: the SI offers the whole ladder, and each language community has quietly settled on the rungs it finds comfortable.
One decimetre equals 10 centimetres, 100 millimetres, or 0.1 metres. It is approximately 3.937 inches, a little under four inches.