Conversion from 10 Kibioctets per second to Bits per second

Information about the Kibioctet per second (Kio/s)

The kibioctet per second is a unit of data transfer rate equal to 1,024 octets per second, and therefore to 8,192 bits per second. Its symbol is Kio/s. Unlike most of the binary rate units it is genuinely common, because the command-line tools that copy, download and synchronise files have reported in it for decades.

The reason is straightforward. Those tools count what they have moved in blocks, and blocks are powers of two. A program that reads in four-kibioctet pieces and divides the total by elapsed time produces a rate in kibioctets per second, and reporting it in decimal kilooctets would require an extra multiplication for no benefit. The unit is what the arithmetic naturally produces.

Anyone who has watched a file copy on a Unix-like system has seen the figure. Download utilities, archive tools, disc-writing commands and network file transfer programs all report progress in kibioctets or mebioctets per second, and most of them label it correctly with the lowercase i. It is one of the few places where the IEC prefixes are used consistently in everyday software.

For scale, a kibioctet per second moves about a thousand characters of text each second: a short letter in a second, a novel in about ten minutes. It is a rate at which a modern web page will not load in any reasonable time, so seeing it in a progress display usually means something has gone wrong with the connection rather than that the transfer is nearly finished.

The difference from a kilooctet per second is 2.4 per cent, which nobody notices. The value of using the binary unit here is not accuracy but honesty: the number came from a binary computation, and writing it with a binary prefix says so. A reader who wants the decimal figure can convert; a reader given a decimal label for a binary number cannot recover anything.

Comparing the reading with an advertised connection speed requires two steps: multiply by eight to get bits, and adjust by 2.4 per cent for the base. In practice the second step is beneath the noise of any real measurement, and the first is the one that matters.

One kibioctet per second equals 1,024 octets per second, 8,192 bits per second, or 1.024 kilooctets per second.

Information about the Bit per second (bit/s)

The bit per second is the fundamental unit of data transfer rate. Its symbol is bit/s, often written bps. It counts how many binary decisions a channel carries in one second, and every other unit of transmission speed is a multiple of it.

Because it is a rate, it has the form of a quantity divided by time, exactly like metres per second or litres per second. That makes the arithmetic straightforward: a link running at a given number of bits per second, multiplied by a duration in seconds, gives the total number of bits transferred, and dividing by eight converts that to octets.

The unit must be distinguished from the baud, which counts symbols per second rather than bits. Early modems transmitted one bit per symbol, so the two numbers were the same and the words were used interchangeably. Modern schemes encode several bits in each symbol — by varying phase and amplitude together — so a channel running at 3,000 baud may carry 33,600 bits per second. Only the bit rate describes how much information moves.

Claude Shannon established the theoretical ceiling in 1948. The capacity of a channel in bits per second depends on its bandwidth and on the ratio of signal to noise, and no coding scheme can exceed it. Every advance in modem and radio design since has been an attempt to approach that limit more closely, and modern systems come within a fraction of a decibel of it.

In practice the raw bit rate of a link is never the rate at which useful data arrives. Protocol headers, error-correcting codes, acknowledgements and retransmissions all consume capacity, and the usable fraction is typically 90 to 95 per cent on a wired link and considerably less on a shared wireless one.

Single bits per second are rarely quoted, because almost every channel is faster. The exceptions are deep-space communication, where a probe billions of kilometres away may return data at a few tens of bits per second, and certain low-power sensor networks that transmit a handful of bits at long intervals to preserve battery life.

One bit per second equals 0.125 octets per second, 0.001 kilobits per second, or about 0.0009766 kibibits per second.