| Decaliters (daL) | Cubic centimeters (cm³) |
|---|---|
| 1 Decaliter | 10000 cm³ |
| 2 Decaliters | 20000 cm³ |
| 3 Decaliters | 30000 cm³ |
| 4 Decaliters | 40000 cm³ |
| 5 Decaliters | 50000 cm³ |
| 10 Decaliters | 100000 cm³ |
| 20 Decaliters | 200000 cm³ |
| 25 Decaliters | 250000 cm³ |
| 50 Decaliters | 500000 cm³ |
| 100 Decaliters | 1000000 cm³ |
| Reference | Decaliters (daL) | Cubic centimeters (cm³) |
|---|---|---|
| A teaspoon | 0.0005 daL | 5 cm³ |
| A can of soft drink | 0.033 daL | 330 cm³ |
| A wine bottle | 0.075 daL | 750 cm³ |
| A bathtub | 15 daL | 150000 cm³ |
| An Olympic swimming pool | 250000 daL | 2.5 × 109 cm³ |
The decalitre is a unit of volume equal to ten litres. Its symbol is daL, and the spelling dekalitre is also accepted. It sits between the litre of the household and the hectolitre of the trade, and although it once had a settled place in European markets it is now among the least written of the metric volume units.
Its historical role was as a physical measure rather than a number. Nineteenth-century French markets sold grain, potatoes, chestnuts and dried beans out of stamped cylindrical vessels holding one decalitre, half a decalitre or a double one, and a trader's set of these was inspected and verified like a set of weights. Selling dry goods by volume was faster than weighing them and needed no balance, so the vessels did real work.
Weighing displaced it. Once cheap accurate scales became universal, dry goods moved to mass, which is fairer to the buyer because it does not depend on how densely a load happens to settle. The decalitre lost its purpose along with the practice, and the vessels survive in museums and in the vocabulary of a few older markets rather than in commerce.
The quantity itself remains perfectly ordinary. Ten litres is a large household bucket, half a jerrycan, the fuel tank of a scooter, or a fortnight of drinking water for one person. It is roughly the volume of a cubic vessel twenty-two centimetres on a side, and it weighs ten kilograms when filled with water.
What killed the unit as a written form was the same pressure that removed deca everywhere else. Metric practice steps by factors of a thousand, so litres serve until about a thousand of them and hectolitres take over for trade quantities. Ten litres is written 10 L, which is shorter than 1 daL, needs no explanation, and sorts correctly beside 5 L and 200 L in the same table.
When the unit does appear, usually in an old record or a translated document, the conversion is a single step. Multiply by ten for litres, divide by ten for hectolitres, and the resulting figure will match modern usage without any loss of precision.
One decalitre equals 10 litres, 0.1 hectolitres, about 2.64 US gallons, or about 2.2 imperial gallons.
The cubic centimetre is a unit of volume equal to one millionth of a cubic metre, written cm³ and often abbreviated cc. It is the volume of a cube one centimetre on each side, and since the litre was redefined in 1964 it is exactly one millilitre. The two names describe the same quantity, but they belong to different trades and are not interchangeable in every context.
Engines are its most visible home. Motorcycle and small-engine displacement is quoted in cubic centimetres, so a 125, a 600 and a litre bike are named by the swept volume of their cylinders. Licence categories in much of the world are drawn on the same scale, with a 125 cc limit for learners in many European countries, which turns the unit into a legal boundary rather than a mere description.
Car engines cross over to litres at about a thousand cubic centimetres, purely for readability, so a 1998 cc engine is advertised as a two-litre. American practice used cubic inches for the same purpose well into the 1980s, and the conversion is worth knowing: 1000 cubic centimetres is 61 cubic inches, so a 350 cubic inch engine is 5.7 litres.
Medicine has deliberately retreated from the abbreviation. Syringes were once marked in cc and clinicians spoke that way, but handwritten cc can be misread as a unit symbol or as a pair of zeros, and medication safety bodies now place it on lists of abbreviations that should not be used. The instruction is to write mL instead, even though the quantity is identical.
Materials science keeps the unit for density. Grams per cubic centimetre is the standard way to state how heavy a substance is for its size: water is 1.00, aluminium 2.70, steel about 7.85, lead 11.34 and gold 19.3. Those numbers are memorable precisely because the cubic centimetre is small enough that everyday solids land between one and twenty.
Modelling and manufacturing use it for part volume. Computer-aided design reports the volume of a component in cubic centimetres, which converts directly to mass once a density is chosen and to material cost in additive manufacturing. It is the natural unit for anything that fits in a hand.
One cubic centimetre equals 1 millilitre, 1000 cubic millimetres, 0.000001 cubic metres, or about 0.061 cubic inches.