Cubic inch per second (in³/s)

The cubic inch per second is a unit of volumetric flow rate equal to one cubic inch passing a point every second. Its symbol is in³/s. A cubic inch is 16.387 cubic centimetres, a little over a tablespoon, so this unit describes the modest but visible flows of imperial engineering practice.

Hydraulics is where it survives most strongly. American hydraulic pumps and cylinders are still catalogued in inches, and a cylinder's speed follows directly from the flow divided by the piston area: a 2-inch bore cylinder has an area of 3.14 square inches, so 31.4 cubic inches per second extends it at 10 inches per second. Working in inches throughout avoids converting the bore, the stroke and the flow separately.

Machining uses the same idea for material removal. A milling cutter taking a 0.1-inch depth at 0.5 inch width and 20 inches per minute of feed removes one cubic inch per minute, and a modern machining centre roughing aluminium can exceed twenty. Tool manufacturers publish removal rates in these units because their customers' machines are dimensioned that way.

Small engines and pumps carry the unit too. An engine's displacement in cubic inches, multiplied by its speed, gives the air it swallows: a 350 cubic inch V8 at 3,000 revolutions per minute ingests 525,000 cubic inches a minute, or about 8,750 per second, ideal efficiency assumed. The old American habit of naming engines by cubic inches is the same measurement standing still rather than flowing.

Metering and dispensing in imperial industries follow. Adhesive dispensers, lubricators and grease systems on American plant are specified in cubic inches per second or per minute, and a shot of grease from an automatic lubricator is quoted in cubic inches per cycle, which the cycle time converts into a rate.

For a sense of scale, 61 cubic inches per second is about a litre per second, and one cubic inch per second fills a US gallon in a little under four minutes. That is roughly the rate of a garden tap opened a quarter turn, which makes the unit easy to picture despite its unfamiliarity outside the imperial trades.

One cubic inch per second equals about 16.39 cubic centimetres per second, 0.01639 litres per second, or about 0.2597 US gallons per minute.

Cubic inch per second conversion table